LED rear light reflector for the Lambretta. Thanks to modern LED technology, the power consumption is significantly lower than with conventional two-filament lightbulbs. This results in a better light yield for the entire system, and there is no break in the lighting effect when the brake light is activated. These are two phase LEDs. This means that each LED is used for the rear and brake lights and [...]

bgm - Item number: BGM6473 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,00 kg Category: Workshop requirements> Tools Other customers who are interested in crimping pliers with ratchet function -BGM PRO- for end caps cable Outer shell Ø = 4mm, Ø = 5mm, Ø = 6mm are interested, also looked for: Crimping pliers | Crimping tool | Ferrules | Cable lug | Pliers | [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

bgm - Item number: 7673428 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frame> Electrical> Fuses Other customers who are interested in fuse -UNIVERSAL- with holder - 10A , also searched for: fuse | Voltage protection | Blade fuse | Fuse | Universal security | Overvoltage | Overvoltage protection [...]

BGM Pro gear parts are ultra-solid material. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest demands. The very good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. Better than Piaggio Ware. Always consistently high quality. No compromise. BETTER Usable for all [...]

bgm PRO air filter box for the Lambretta series 1-3. The starting point is a SIL air filter box. A connection piece to the frame with a diameter of 50 mm is hard-soldered into this. The diameter of the airbox corresponds to that of the frame. The box and the air filter connector are powder-coated in white. All additional work has been carried out on site in Cologne. Included [...]

bgm - Item number: BGM6412CC Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,21 kg Category: Frames> Cables> Cables Other customers who are interested in clutch cable -BGM ORIGINAL- Vespa PX (- 1984), Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), GT125 (VNL2T), GTR (VNL2T), TS125 (VNL3T), GL150 (VLA1T), GS160 / GS4 [...]

0 bgm - Item number: 7673412 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Carburettor> Diaphragm plates Other customers who are interested in membrane plates -BGM PRO- type Yamaha RD350 YPVS - GRP platelets are of interest, also searched for: Membrane platelets | Membrane plate | Flutter valve | Membrane plates | Diaphragm block plate [...]

bgm - Item number: 3333226KT Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Frame> Shock absorbers> Screws Other customers who are interested in screw set rear shock absorber -BGM ORIGINAL- M9 x 70mm extra long, SW14, galvanized- used for YSS / BGM PRO SC shock absorber / motor - Vespa V50, PV, ET3, [...]

The BGM PRO variator dethrottles the drive and enables significantly better acceleration and a higher top speed. The roller tracks have been specifically calculated for each model. The sliding surface of the belt has been optimized for better grip. Thanks to the very good sliding properties of the rollers (including a sliding varnish-coated riser disc), this variator - completely gentle on the engine - already brings up [...]

Spacer -BGM PRO- Vespa V50, PV 125, ET3, PK 50-125 - 8 mm. Spacer to compensate for the longer connecting rod of the 54 mm long stroke shaft. bgm - Item number: BGM0223 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,08 kg Category: Motor> Cylinder> Spacer Other customers who are [...]

bgm - Item number: BGM7988 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,88 kg Category: Frames> Wheels> Rims Other customers who wanted rims -BGM PRO tubeless 2.10-10 inches Aluminum Vespa (type PX) - Vespa Smallframe V50, 50N, Special, PV, ET3, PK50-125 (S / XL / XL2), Largeframe PX, T5, [...]