Mixture adjustment screw without spring for bgm PWK, Keihin PWK and Stage6 PWK carburetors bgm - item number: BGM8507 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Carburetor> Carburetor components Other customers who are interested in mixture adjustment screw -BGM for PWK- (bgm, Stage 6, Keihin) were also looking for [...]

bgm - Item number: BGM7908TL Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 1,00 kg Category: Motor> Tools> Tools Other customers who are interested in punch assembly tool for installation of ball bearing auxiliary shaft 6302 -BGM PRO- Vespa PX200, Rally180, Rally200, COSA200, T5 125cc, GS150 / GS3, Hoffmann, T1, T2, T3, GL [...]

bgm - Item number: 7673423 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frame> Electrics> Carburettor components Other customers who are interested in mixture adjustment idle gas screw set -DellOrto PHBL 22-24-25 / PHBH 28-30 carburettor interested, also looked for: Mixture adjustment | Idle screws | Set | Screw | Adjusting screw | [...]

Gearbox from BGM Pro for Vespa largeframe engines. Available with or without a main shaft. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest loads. This extremely good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion permanently resistant to wear. This makes the BGM gear parts an uncompromising [...]

bgm - Item number: BGM2109TU Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,00 kg Category: Motor> Tools> Tools Other customers who are interested in flywheel holder -BGM PRO Electronics- Lambretta LI, LIS, SX, TV, GP, DL - Motorbozen 21,5cm + 29cm are of interest, also searched for: pole wheel holder | Holder [...]

bgm - Item number: BGM4511 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frames> Brakes> Brake-clutch levers Other customers who wanted brake lever set -BGM PRO CNC Sport, long (165mm) - Vespa LX, LXV, S, Primavera 50-150, Sprint50-150 - chrome are interested, also looked for: brake levers | Brake handle [...]

Part of the bgm PRO air filter box (Art. No. BGM4488) modification. The part made in Germany can be used to modify original air filter boxes for higher air throughput. The diameter of the weld-in piece corresponds to that of the hole in the frame. bgm - item number: 3333403 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,15 kg Category: [...]

The bgm PRO Superstrong clutch linings in the "Racing Red" version are among the best-performing linings on the market. The heavy-duty organic pad mixture is created for the high pressures and high temperatures in racing. The high-quality covering material is thinner than a conventional cork covering. This enables the installation of an additional friction disc in the entire Racing Red pad package. Semi-organic covering material [...]

Washer on crankshaft under clutch from bgm Pro The washer between crankshaft and clutch has three very important tasks to fulfill: Establishing the controlled preload between crankshaft and ball bearing Providing a plain bearing surface for the clutch pinion during operation of the clutch The correct distance between the clutch and the Manufacture bearings so that the gearing with [...]

Silent rubber at the rear, shock absorber mount in the engine block. This rubber takes the lower mounting fork of the rear shock absorber. Therefore, the good condition of this rubber is essential to keep unpleasant vibrations and oscillations away from the driver and to ensure that the damper is guided properly. Length: 34,5mm Ø outside: 30mm Ø inside: for 15mm bolts This version is longer than the [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

BGM Pro gear parts are ultra-solid material. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest demands. The very good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. Better than Piaggio Ware. Always consistently high quality. No compromise. BETTER Usable for all [...]