BGM PRO Superstrong 2.0 CR - the original, now with Ultralube Extremely resilient coupling, very easy to use - Made in Germany The Superstrong 2.0 CR coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and a [...]

BGM chain sprockets are developed for the enormous powers and torques of today's engines. Made from high-alloy SCM415 / 15 CrMo 5 steel. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) provides a reassuringly secure basis for the production of BGM pinions. The production meets the high standard for transmission production by Honda. Each [...]

If the mirror holes in the handlebar trim of the GTS models from 2016 are to be closed, this is difficult to implement due to the uneven trim in this area. The specially manufactured cover caps from BGM PRO are an optical and technically first-class solution. These are made of the same material as the handlebar cover and exactly follow the design.

bgm - Item number: BGM0902E Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust> Springs Other customers who are interested in exhaust spring -BGM ORIGINAL- stainless steel - 60mm interested, also looked for: exhaust spring | Spring | Exhaust bracket | Exhaust retaining spring | Manifold spring | Retainer | [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

BGM clutch pinions are bulletproof. Developed for the enormous power and torque of today's engines, they are made from high-alloy steel (SCM415 / 15 CrMo 5) according to the highest manufacturing standards. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) provides a reassuringly secure basis for the production of BGM pinions. The production meets the high [...]

BGM PRO shaft sealing rings made of high-quality and ethanol-resistant (E10) FKM / Viton® * CORRECT HEIGHT (20x62x7MM INSTEAD of 20x62x6.5MM) The coupling-side BGM PRO shaft sealing ring has an overall height of 7mm instead of the 6.5mm usual with other manufacturers. The BGM PRO shaft seal is based on the original old model from Piaggio. Anyone who takes apart an old original engine will [...]

We carry indicator glasses from Piaggio, Siem, Triom as well as Bosatta and BGM. TRIOM / SIEM Both high-quality manufacturers who manufacture for Piaggio and therefore have an E-mark. The two manufacturers only differ slightly in terms of design and color. For perfect color consistency and fit, read off which manufacturer it is on the indicator body before buying. PIAGGIO Piaggio will [...]

bgm - Item number: BGM2200G Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Seals> Seals Other customers who are interested in cylinder gasket set -BGM PRO MRB-Racetour 195 ccm-Lambretta LI 125-150, LIS 125-150, SX 150, DL 125-150, GP 125-150 are also looking for: Seal kit [...]

BGM Pro shims for the clutch are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. WHY The shim is needed to distance the clutch in the engine. It is installed under the coupling pinion and is available in thicknesses of 0,8-1,6 mm (in 0,2 mm increments). [...]

bgm - Item number: BGM79N05 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Frame> Fork> Nuts Other customers who are looking for headset cup lock nut h = 5mm -BGM ORIGINAL- Vespa PX, Sprint, Rally, GT, GTR, GL, TS, Super, SS180, GS160, V50, V90, PV125, ET3, PK, PKS, PKXL1, Vespa [...]

Front shock absorber -BGM PRO SC COMPETITION- for Vespa Largeframe Rally, Sprint, GT / GTR, TS, GL, Super, VNA, VNB, VBA, VBB Wideframe V30-33, VM, VN, VL, GS150 / GS3, VB, ACMA (1952-), Hoffmann Königin The BGM PRO SC Competition shock absorber is a further development of the successful BGM PRO F16 Sport series. The competition series differs optically through the [...]