The bgm PRO Racing shaft is designed as a stable shaft for ESC class 1 drivers. With a 51mm stroke, 97mm connecting rod length and a sturdy Ø24mm alternator stub, as a full-cheek shaft, it offers ideal conditions to fully exploit the limits of this racing class. The large crank webs offer significantly more overlap over the crank pin, resulting in a higher pressing dimension and thus [...]

bgm - Item number: BGM7783ADJ195 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frames> Shock absorbers> Shock absorbers Other customers who are interested in front shock absorber adapter -BGM PRO for BGM PRO SC / F16 - Vespa PK - 195mm, also looked for: Shock absorber adapter | Front | Damper adapter | [...]

bgm - Item number: BGM0901EX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust> Springs Other customers who are interested in exhaust springs -BGM ORIGINAL- stainless steel (10 pieces ) - 55mm, also searched for: exhaust spring | Spring | Exhaust bracket | Exhaust retaining spring | Manifold spring | Retainer [...]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. As in the original, the clamping screws for the shift cables have an internal plate. This protects the inner cable of the Bowden cable and helps to [...]

bgm - Item number: BGM8311 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Engine> Clutch> Clutches Other customers who are looking for seals for spacer clutch cover -BGM PRO- Vespa Wideframe VM1T, VM2T, VN1T (-60000), VU1T, ACMA 125 (1951-1955), Motovespa 125N (1953-1958) - Ø = 128 × 0,5mm interested, looked [...]

Latest version of the proven BGM PRO HP (High Power) ignition base plate for electronic ignition. BGM has revised the well-proven BGM PRO ignition base plate and made it even better. A significantly higher light output than with conventional base plates is complemented by the very high quality of the coils and pick-up. In addition, the cabling was converted to textile-coated silicone cables. Another one [...]

For permanent fixation, stickers need a clean, smooth and degreased surface. Our brake cleaner, for example, is very suitable for degreasing. In the case of larger areas to be glued, it is always an advantage to spray the area with a little water before gluing. The water can also be mixed with a few drops of detergent to make it [...]

Speedometer BGM ORIGINAL 120km / h for Vespa PX (years of construction 1977-1984) Very nice reproduction of the original speedometer for the old Vespa PX models ('77 -'84). Has a precise eddy current measuring mechanism. The speed display is therefore pleasingly accurate *. Visually very close to the original, the BGM ORIGINAL speedometer also has an odometer with a hundred meter counter. The speedometer lighting uses, deviating [...]

The thrust blocks are the connection in the motor between the switching arm and the switching claw. It transmits the angular momentum of the shifter on the handlebar to the claw in the motor. The BGM thrust blocks are made of wear-resistant and high-strength 42CrMo4 material. They renew the switching precision as it was originally available. They should therefore always be exchanged when the [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM0233S05 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinders> Spacers Other customers who are interested in spacers cylinder base -BGM ORIGINAL for Polini Evolution 133ccm , Parmakit SP09 130ccm, 135ccm, Parmakit Evo (-C) 135ccm- Vespa V50, PV125, ET3, PK50, PK80, PK125 - [...]

Lambretta cylinder base gasket with a thickness of 1,0 mm for the small engine blocks with 125-193 ccm displacement. Ideal to compensate for connecting rod lengths, differences in the heights of the engine sealing surfaces, turned cylinders or to be able to experiment with the control times. The size of the overflow channels is dimensioned so that it corresponds to the standard overflows. Ideally, this should match the engine block and cylinder.