Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

Oversize O-ring in order to achieve a sufficient sealing effect even with a heavily worn out hole for the shift linkage. Please use with grease to avoid damage during assembly. bgm - Article number: BGM12OR7NOS Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor> Gearbox> [...]

Cable harness BGM ORIGINAL suitable for all Vespa PX models up to year of construction 1982 Italian version without battery. With this, the indicators, the horn (so-called buzzing) and all other consumers are supplied with power directly via the AC on-board network. The ignition base plate used in these vehicles is suitable for this with only 3 cables (contact ignition models) or 5 cables (vehicles).

This practical bgm Pro dosing bottle fulfills two tasks: on the one hand it serves as a storage container for amounts of up to 500 ml and at the same time small amounts can be dosed very easily and quickly. The upper dosing chamber is filled simply by pressing the lower body of the bottle and has graduation marks in 5 ml increments up to 25 ml.

Lambretta cylinder head gasket with 2,5 mm thickness and 71,0 mm diameter. Ideal to compensate for connecting rod lengths, compression heights, longer strokes or twisted cylinders. bgm - Item number: BGM0247 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacer cylinder head [...]

Speedometer BGM ORIGINAL 120km / h for Vespa PX (years of construction 1977-1984) Very nice reproduction of the original speedometer for the old Vespa PX models ('77 -'84). Has a precise eddy current measuring mechanism. The speed display is therefore pleasingly accurate *. Visually very close to the original, the BGM ORIGINAL speedometer also has an odometer with a hundred meter counter. The speedometer lighting uses, deviating [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

Speedometer glass incl. Decorative ring WHAT FOR Perfect repair kit for the speedometer. Either to replace a scratched / defective glass or to visually upgrade the speedometer. We also offer the sets in various designs. In our opinion, the tinted glass looks particularly elegant. HOW In the set is the speedometer glass ring that connects the speedometer glass and the speedometer [...]

bgm - Item number: BGM6476TX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,07 kg Category: Workshop supplies> Trains Other customers who are interested in end cap for outer cable -BGM ORIGINAL- Ø inside = 6mm - 10pcs. interested, also searched for: end cap | Outer cable | End cap | Pull sleeve | Pull cap | Sleeve | Grommet [...]

Lambretta cylinder base gasket with a thickness of 3,0 mm for the large engine blocks with 200-250 ccm displacement. Ideal to compensate for connecting rod lengths, differences in the heights of the engine sealing surfaces, twisted cylinders or to be able to experiment with the control times. The size of the overflow channels is dimensioned so that it corresponds to the standard overflows. Ideally, this should match the engine block and cylinder.

bgm - Item number: BGM2225BS07 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are looking for Spacer cylinder base -BGM PRO RaceTour- Lambretta SX 200, TV 200, DL / GP 200 - 0,7mm are also looking for: Spacer | Cylinder base | Distance seal [...]

Lambretta bgm PRO MRB RaceTour membrane piston kit with 65 mm diameter. Complete piston kit consisting of: piston, two steel piston rings a 1 mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is the perfect choice if you have converted your RT 195 cylinder to diaphragm control and have a durable [...]