Cylinder head gasket -BGM PRO- 1,5mm Malossi 210ccm, Polini 207ccm bgm - item number: 3820035 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Motor> Cylinder> Spacer Other customers , who are interested in spacer cylinder head -BGM ORIGINAL Malossi 210 ccm- Vespa PX200, Rally200 - 1.5mm, also looked [...]

Front headlights with 2x 35 watt halogen power! Suitable for Yamaha Aerox / MBK Nitro. The headlight unit not only brings you an extremely bright and brilliant light, the optics are also much more modern and adult than the old series headlights. The lamps can be switched separately. With E-mark (can be used in traffic without registration)! bgm - Item number: BGM5091 Availability: [...]

BGM PRO speedometer cables correspond to the factory specification and impress with their high quality and low price. All speedometer cables have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as a high-quality outer shell or a properly pressed square. The installation of the already greased speedometer cable is easy.

BGM pro special tool for the end shield of the rear wheel bearing of all Vespa Wideframe models. Thanks to its clever construction, this tool can be used for both hole stitch sizes (Ø37 + 43mm). It offers the possibility of pre-tensioning the tool on the nut to be loosened. Due to the identical thread pitch of the tool and nut, the preload is fully retained during loosening, preventing slipping.

bgm - Item number: BGM79W25 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Frame> Body> U-washers Other customers who are interested in washer headset -BGM ORIGINAL- 30,2 , 40,0 × 2,5xXNUMXmm - used as a nose washer, also looked for: headset cups | Nasal disc | Nasal disc | U | Disc | [...]

bgm - Item number: BGM1220MAPX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Seals> Seals Other customers who are interested in seals crankcase / fan wheel housing (10x) -BGM PRO silicone Lambretta LI. LIS, SX, TV (Series 2-3), DL / GP 125-200 are also interested in: Seal | Crankcase | [...]

The power and torque values ​​of so-called smallframe motors that are now possible have increased significantly in recent years and seem to be growing steadily. Power and torque values ​​of well over 35PS / 30Nm can be found more and more frequently. As a result, other components are of course also stressed significantly more. An important and highly stressed link between the crankshaft and the gearbox is [...]

The Fast Flow petrol taps have a high flow rate and ensure a perfect supply of fuel to the carburetor even on powerful engines. They can be exchanged 1: 1 for the original fuel tap. The fuel tap is available in these variants: TYPE WITH RESERVATION The version with reserve position corresponds to the functionality of a conventional fuel tap (open / reserve / closed). Here is [...]

bgm - Item number: BGM1770HS08 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacers Other customers who are looking for Spacer cylinder head -BGM PRO 177/187 ccm - Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-) - 0.8mm interested, searched [...]

bgm - Item number: 708090 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Carburettor> Sockets Other customers who are interested in vacuum connection -BGM ORIGINAL- M6 (SW = 8, with O-ring, Ø inside = 3,5mm, Ø outside = 6,1mm, length = 30mm), also looked for: vacuum connection | [...]

PRIMARY KIT BGM PRO EXTRA LONG Motors with a lot of torque and an early power peak choose the straight-toothed clutches that also require a straight-toothed primary gear (also available as a set with clutch). This enables very long reductions to be achieved. Also perfectly suitable if the overall transmission ratio is changed in very sporty engines with a modified auxiliary shaft and shorter gear steps.

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]