The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

BGM primary gears are bulletproof. Developed for the enormous power and torque of today's engines, they are made of high-alloy steel (SCM415 / 15 CrMo 5) according to the highest manufacturing standards. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) offers a reassuringly secure basis for the production of BGM primary wheels. The production meets the high [...]

BGM clutch pinions are bulletproof. Developed for the enormous power and torque of today's engines, they are made from high-alloy steel (SCM415 / 15 CrMo 5) according to the highest manufacturing standards. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) provides a reassuringly secure basis for the production of BGM pinions. The production meets the high [...]

Mirror from BGM PRO for handlebar mounting on classic Vespa scooters The BGM PRO mirrors have an ideal ratio between arm length and mirror surface. With a mirror surface of just 95mm, the optics harmonize perfectly with classic scooters. The length of the mounting arm was measured so (250mm) that there is always a perfect view to the rear. He protrudes [...]

Small upgrade kit for the primary transmission of all PV125, ET3, PK80-125 S / XL / XL2 motors. The set massively strengthens the primary drive, making it durable for powerful engines. The massive CNC-milled cover disc effectively prevents the thin standard discs from breaking through and thus holds the shock absorber springs in place. Also available as a large upgrade kit with [...]

Conversion wiring harness for retrofitting to: Vespatronic ignition system in Rally, Sprint, VBB, Super, VNA, VNB, etc. The retrofitting to a more modern alternator / ignition type is a tried and tested means to be more permanent and safer on the road. The non-contact CDI ignitions are almost indestructible and reliable, as is the light output with a modern, regulator-supported on-board electrical system.

The standard replica cylinder in convincing processing quality to help the worn original unit get fresh driving pleasure by exchanging it, or as a cheap replacement for the original. Including all necessary parts such as pistons, piston pins, clips and piston rings. Please order cylinder base gasket (BGM1207Z) separately. bgm - Item number: BGM9977 Availability: in stock (Please check availability here in the Scooter Center Shop) [...]

bgm - Item number: BGM8010GGP Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,18 kg Category: Engine> Clutch> Clutch pressure plates Other customers who are interested in disc for clutch pressure plate -BGM PRO Superstrong 10 Springs - Lambretta - Type GP are interested, also looked for: Pressure plate | Clutch | Plate | [...]

The BGM PRO variator dethrottles the drive and enables significantly better acceleration and a higher top speed. The roller tracks have been specifically calculated for each model. The sliding surface of the belt has been optimized for better grip. Thanks to the very good sliding properties of the rollers (including a sliding varnish-coated riser disc), this variator - completely gentle on the engine - already brings up [...]

bgm - Item number: BGM2504BPO Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,15 kg Category: Frame> Brakes> Brake pads Other customers who are interested in brake pads -BGM ORIGINAL STANDARD 52,6 × 44,1 × 7,5mm - Stage6 R / T 4 piston radial brake caliper - pad material Organically interested, also looked for: Brake pads | Baking | Coverings [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

bgm - Item number: 7673822 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,07 kg Category: Engine> Ignition> Cables Other customers who are interested in ignition cables -UNIVERSAL Ø = 7mm- 100cm - Schwarz are also interested in: Ignition cables | Ignition cable | Spark plug wire | Cable | Ignition | Cable | Cable [...]