Auxiliary jet set -BGM PRO Dellorto PHBG- MA- (30-50) bgm - item number: 7671257 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Carburetor> Carburetor- Nozzles Other customers who were interested in auxiliary nozzle set -BGM PRO for Dellorto (type: 1488) PHBG- MA- (30-50) also looked for: auxiliary nozzle set | [...]

The bgm PRO clutch steel disks are manufactured exactly flat and allow the clutch to be separated precisely. Due to the very good concentricity, the clutch can be perfectly dosed. The steel discs are available in the original thickness of 1,5 millimeters and in a sports version with a height of just 1,0 millimeters. The sport version enables the assembly of a lamellar disc, which [...]

BGM PRO speedometer cables correspond to the factory specification and impress with their high quality and low price. All speedometer cables have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as a high-quality outer shell or a properly pressed square. The installation of the already greased speedometer cable is easy.

bgm PRO wiring harness for all Lambrettas with electronic ignition. The wiring harness is made with as few cables as possible, so it corresponds to the ideal of minimal electronics. The wiring goes to CDI, voltage regulator, headlight connector in the steering head, brake light switch and taillight. There are no annoying clipboards. A piece of bougier tube for the cable branch of the ignition base plate is included in the scope of delivery. The wiring harness [...]

This kit shifts the pivot point of the shock absorber to the height of the wheel center. This controls the shock absorber directly, without any translation. This improves both the responsiveness as well as the originally very strong tendency to brake nod. The damper does not hit as quickly, the vehicle is safer to drive. The driving behavior is already very close with this kit [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

BGM Pro Sport bench made by Nisa Italy Based on the very popular Nisa 'Sport 20' bench, we had a BGM version made by NISA. AUTHENTIC LOOK The BGM Pro Sport bench has a beautiful Alfatex cover (embossed waffle pattern) on the sides and back and is also available with gray piping. The seat is also [...]

The BGM FASTER FLOW SI carburetor is based on a brand new SI26 / 26 E Dell'Orto / Spaco carburetor. With a diameter of 25mm, these already have significantly more area than a SI24 carburettor. In principle, this type of carburetor can be drilled out further, but then the guidance of the throttle valve and its sealing function are no longer 100% guaranteed. Therefore we restrict [...]

Clever clutch tool for Vespa with double function. Designed by Wi.FSI-Parts made by BGM Pro. PULLER (Largeframe) The coupling is often stuck on the crankshaft stub. With this puller it can be removed quickly and gently. COMPRESSOR (Small + Largeframe) Ideal for compressing the clutch. This relieves the load on the circlip, and the pads can be changed quickly and safely. TECHNICAL INFO: [...]

Our tuning fan wheel not only looks good, it also cools your engine better. This makes it ideal for tuned engines. Of course, it also looks great on standard engines. The bgm PRO Racing is also lighter than the series part. Due to the lower centrifugal mass, the engines hang more poisonously on the gas and can turn further. Technique tip: [...]

bgm - Item number: 7671276 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,18 kg Category: Frame> Body> Screw sets Other customers who are interested in screw set cover parts -BGM ORIGINAL - Yamaha Aerox (YQ50 / L, 2-stroke), MBK Nitro (YQ50 / L, 2-stroke) - Interest in chrome, also looked for: screws | Set | Screw set [...]

The BGM stainless steel rim is manufactured in Germany with high precision by a renowned and, of course, certified company. The result is a rim that even Enrico Piaggio couldn't have made better. The high-strength rim is characterized by perfect concentricity, absolute freedom from rust and a reinforced rim flange. Regardless of whether stainless steel is left in its natural state or is highly polished, both versions are [...]