BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

bgm - Item number: BGM2220HS07 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Cylinder> Spacer Other customers who are looking for Spacer cylinder head -BGM PRO RaceTour Ø = 65,0 , 8mm 125-way screw connection - Lambretta LI 150-125, LIS, SX 150-175, TV 2 (series 3-125), DL / GP 150-0,7 - XNUMXmm [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

Brake pads BGM PRO Sintersport - massive stopping power The BGM PRO sintered brake pads are a new generation of pads. It is all-metal brake pads that are manufactured in a complex sintering process. With these pads, braking performances are achieved that meet the highest demands. QUALITY The BGM Pro brake pads are manufactured exclusively for BGM by one of the most renowned Italian brake pad manufacturers. [...]

bgm - Item number: BGM0903E Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Exhaust> Springs Other customers who are interested in exhaust spring -BGM ORIGINAL- stainless steel - 70mm , also searched for: exhaust spring | Spring | Exhaust bracket | Exhaust retaining spring | Manifold spring | Retainer | Exhaust [...]

Special tools - Made in Germany Assemble a bearing quickly and easily like a professional. That is possible with this quality tool. The bearing is neatly guided and cannot tilt. The motor housing is protected. Used to mount the split barrel bearing type NU204 on the crankshaft of the Vespa Smallframe models. The tool takes [...]

bgm - Item number: BGM7913GS48 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Motor> Gearbox> Screws Other customers who are interested in grub screw with pin -DIN915- M8 x 20mm - Hexagon socket with pin 4,8mm - Interested in spare part for BGM7913, also looked for:

Plastic storage dummy. This allows the crankshaft to be mounted and moved in the engine housing on a trial basis and without any effort. Thus neither the crankshaft nor new bearings are stressed for pure measurement purposes. Ideal to control the control angle of the crankshaft (rotary valve inlet) or the cylinder (exhaust angle, overcurrent angle). Made in Germany (US) bgm - Item number: BGM1207TL Availability: out of stock (Please check [...]

Complete set to match your indicators and the taillight perfectly to the look of the scooter. With a few, easy-to-use hand movements, you get a great look! bgm - Item number: K070200 Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,15 kg Category: Frame> Electronics> Indicator glasses [...]

bgm - Item number: SC5010 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,50 kg Category: Engine> Ignition> Wiring harnesses Other customers who are interested in cable branch ignition coil / cable box -BGM ORIGINAL- Vespa V50, 50N, SR50, SS50, V90, SS90, PV125 are also interested in: Wiring harness | Harness | Cable set | Cable set [...]

Mirror from BGM PRO for handlebar mounting on classic Vespa scooters The BGM PRO mirrors have an ideal ratio between arm length and mirror surface. With a mirror surface of just 95mm, the optics harmonize perfectly with classic scooters. The length of the mounting arm was measured so (250mm) that there is always a perfect view to the rear. He protrudes [...]

bgm - Item number: BGM8015W Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor> Clutch> Ball bearings Other customers who are interested in disc for axial needle roller bearings AXK 1024 / NTB 1024 - AS 1024- (10x24x1mm) - (used for clutch pressure plate BGM8015) are also looking for: needle roller bearings [...]