The BGM ORIGINAL silent rubbers are intended as a high-quality replacement for the original parts. Most silent rubbers are decades old and usually worn out accordingly. With the pair of bgm motorized rubber rubbers, the chassis regains directional stability, steering precision and rigidity. Installation is simple and is ideal, for example, in the course of an engine overhaul. ASSEMBLY Vespa [...]

bgm - Item number: BGM2105U4DP Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,50 kg Category: Engine> Exhaust> Exhaust manifold Other customers who are interested in exhaust manifold -BGM PRO Clubman V4.0- Lambretta series 1-3 - unpainted interested, also looked for: exhaust manifold | Elbow | Exhaust flange | Exhaust manifold | [...]

Cover plate to close the opening for the electric starter in the air duct of the motor housing of the PX, T5 and Cosa models. Useful if the electric starter is removed or is not available. This means that no valuable cooling air is lost. bgm - item number: 7671454 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. [...]

bgm - Item number: 7671268 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,13 kg Category: Frame> Electronics> Taillight lens Other customers who are interested in Taillight lens -BGM ORIGINAL Vespa Antique- Metal small - Are interested in red, also looked for: taillight lens | Taillight lamp lens | Tail light lens | Reversing light glass | Rear light glass | [...]

Perfectly matching new edition of the leg shield edge protection for the Vespa PK50 S, PK80 S, PK125 S and PK125 ETS models. The PK S / PK ETS models have, compared to all other models, an inverted flanging of the leg shield edge. The PK S / ETS-specific edge protection was therefore not available for years. The edge protection is available in: Silver (PK S [...]

BGM PRO Superstrong - the original Extremely resilient coupling, very easy to use - Made in Germany The Superstrong coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and extremely high torsional rigidity. It offers a [...]

BGM clutch pinions are bulletproof. Developed for the enormous power and torque of today's engines, they are made from high-alloy steel (SCM415 / 15 CrMo 5) according to the highest manufacturing standards. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) provides a reassuringly secure basis for the production of BGM pinions. The production meets the high [...]

20-piece trim screw set. The kit contains 20 pieces each. Screws with pan head and tapping screw thread as well as 20 pcs. Speed ​​nuts. Ideal for connecting the vast majority of trim parts on, for example, Piaggio / Gilera / Yamaha / MBK / Aprilia vehicles. Dimensions: Screws: Ø screw head: 12mm Ø thread: 5,0mm screw length (without head): 15mm sheet metal nuts: length: 20mm width: 13mm bgm - item number: 7673431 Availability: in stock (Please check [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM6564C Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 1,97 kg Category: Engine> Gearbox> Gearbox Other customers who wanted ancillary shaft set -BGM PRO- Vespa PX200, Rally200 - 12-13-17-21 teeth with primary gear BGM 64 teeth and primary repair kit reinforced BGM PRO are interested, also looked [...]

bgm - Item number: 7673820G Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Ignition> Wiring harnesses Other customers who are interested in cable branch ignition base plate -VESPA- Vespa PX old ( 7 cables) - interested in gray cable, also searched for: cable branch | Ignition stator | Cable branch | Cable branch | [...]

We are now offering you high-quality cable lugs in bare brass for crimping and / or soldering. The bare brass is very easy to solder and corresponds to the appearance of the original wiring harness. In connection with our suitable cables, bougie tubes and shrink tubing sets, a defective cable harness can be repaired or, if necessary, even completely new. The cable lugs are [...]