Precision measuring tool for determining the top dead center and the ignition point. The suitable holder for mounting in place of the cylinder head is included. bgm - Item number: 8099009 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,41 kg Category: Workshop requirements> Tools Other customers who are interested in dial gauge -BGM ORIGINAL- Universal 0,01-10mm - [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

bgm - Item number: BGM2710 Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 3,93 kg Category: Frame> Seat> Seat covers Other customers who are interested in seat covers -BGM PRO- LAMBRETTA- LI , TV (Series 2) - Red Beige are also interested in: Seat cover | Coating | Seat cover | Seat cover [...]

With the CDI holder from bgm it is possible to install a CDI for the electronic ignition on a Ciao of the first and second series without further modifications. The holder is simply placed under the two motor screws and attached to the motor. The following materials are required for assembly: 1. 4x washers M5x15x1,2mm 2. 2x self-locking nuts [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

High-quality CNC sport levers from bgm PRO for vehicles with hydraulically operated front disc brakes with Grimeca or LML brake pumps. Suitable for Vespa PX from 1998-2003 as well as all LML vehicles / brake pumps. Milled from solid aluminum, with an elegant, hard-wearing hard anodized surface. Ergonomically much better than the original levers, they offer better performance and feedback. Also ideal [...]

bgm - Item number: BGM4590KTRD Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,24 kg Category: Frame> Brakes> Frame parts Other customers who are looking for cover brake pump set -BGM PRO, without Mirror holes- Vespa GTL125 / 200 (ZAPM311, ZAPM312), GTS125 (ZAPM313), GTS250 (ZAPM451), GTS300 (ZAPM452), GTS ie Super125 (ZAPM453), GTS ie Super300 [...]

BGM ignition base plates and ignition kits are the solid basis for a high-quality engine. The powerful alternator guarantees perfect light output, the HQ ignition components a clean and powerful engine, the BGM pole wheel an extremely quiet engine run. Ideal for upgrading a decrepit, contact-controlled electrical system to a modern, maintenance-free high-performance ignition. ADVANTAGES: High light output thanks to maximum number of windings Proven excitation coil [...]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. As in the original, the clamping screws for the shift cables have an internal plate. This protects the inner cable of the Bowden cable and helps to [...]