When choosing crankshaft bearings, you should always pay attention to high quality. We have put together BGM ORIGINAL bearing sets for you. In addition to quality bearings, the kit also contains high-quality shaft seals. Each part of the bearing set is at least at the original manufacturer level. Shaft seals in this set are supplied exclusively by Corteco, ball bearings from renowned European [...]

bgm - Item number: BGM6190 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,84 kg Category: Engine> Gearbox> Main shafts Other customers who are interested in main shaft -BGM ORIGINAL- Lambretta LI, LIS , SX, TV (series 2-3), DL, GP are also interested in: Main shaft | Axle shaft | Drive shaft | Secondary wave [...]

Very nice replica of the original rear light of the Rally, Sprint and Primavera models. Both the processing quality, the shape and the pattern of the glass are very close to the original from SIEM. Only the test marks of the original SIEM glass are not available. Delivery incl. Mounted upper plastic cover, without fastening screws. Scope of delivery: rear light glass rear light glass cover (fully assembled on the rear light glass) lamp holder [...]

BGM original swing arm bearing set for revision of the bearing between fork and swing arm The connection between the steering tube and the front wheel swing arm is a highly stressed component on the Vespa models. Forces from all directions must be safely absorbed and transferred. The swing arm mounting is responsible for precise wheel guidance and transmits the steering impulse. Thus also a TÜV-relevant component. Camps [...]

Complete locking set for the auxiliary shaft of Vespa largeframe engines such as PX, T5, Cosa, Rally Contains 1x washer 1x locking washer 1x nut M9 / SW17 Tightening torque of auxiliary shaft nut: 30-35Nm The reinforced BGM primary repair set (BGM0195F48) and the auxiliary shaft set ( BGM6503PKT) bgm - item number: BGM6503NKT Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: [...]

BGM PRO Superstrong 2.0 CR - the original, now with Ultralube Extremely resilient coupling, very easy to use - Made in Germany The Superstrong 2.0 CR coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and a [...]

bgm - Item number: BGM9030 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Motor> Motor housing> Screw sets Other customers who are interested in oil drain plug set M8 x 8mm - BGM PRO with magnet- Vespa PX, T5 125cc, Cosa, Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), [...]

bgm - Item number: BGM7751B Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 1,46 kg Category: Frame> Shock absorbers> Shock absorbers Other customers who are interested in front shock absorbers -BGM PRO SC / F1 SPORT , 275mm- Vespa Primavera 50 (2013-2016), Vespa Primavera 125 (2013-2016), Vespa Primavera 150 (2013-2016), Vespa Sprint 50 (2013-2016), [...]

With the Sport and Competition line, BGM Pro has two high-quality shock absorber series in its delivery program. Both have in common the perfect workmanship, the high material quality and approval by means of ABE. Despite their high resilience, the dampers are very light, as they are made of high-strength CNC aluminum and have excellent surface protection made of hard anodized aluminum. The front [...]

Speedometer BGM PRO 160km / h for Vespa PX (years of construction 1977-1984) The BGM PRO speedometer has a precise eddy current measuring mechanism with a display range of up to 160km / h (series speedometer = 120km / h). It replaces the factory-installed speedometer 1: 1. Today's engine and transmission technology enables concepts that bring the series tachometer to its limit in third gear. The BGM Pro [...]

bgm PRO suction hose with increased volume in front of the carburetor compared to the original suction hose. The intake hose is available with four different connection sizes on the carburetor: 40 mm (e.g. Dellorto PHBL 25), 42mm (Dellorto PHBH 28-30), 45 mm (Mikuni TM24 and Jetex SH22) or 50 mm (Keihin PWK 28, Polini 28 - 30). The connection width on the air filter is [...]

Special tool - Made in Germany Dismantling tool for bearing type NBI253815. Suitable vehicles: Vespa PX, Cosa, Sprint Veloce. PK ETS Is used to remove the needle bearing cage of the crankshaft bearing from the small engine housing. To do this, dismantle the small motor half, remove the shaft seal and insert the tool from the shaft seal side. Heat the motor housing and remove the bearing with light blows.