Compact voltage regulator for all alternators with 6 volt on-board voltage. The power supply of older vehicles with 6V voltage is often designed as a so-called self-regulating system. Only the resistance of the bulbs prevents overvoltage and thus the lamps from burning out. Such a simple electrical system unfortunately always harbors the risk that a defective pear will also cause all [...]

Nice spare part that enhances every restoration. Aluminum. bgm - Item number: 9010029 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,29 kg Category: Motor> Gearbox> Kickstarter Other customers who are looking for Kickstarter Vespa V50, PV, ET3 - aluminum polished, also searched for: Kickstarter | Starter lever | [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

BGM clamping plate sets as well as their individual parts are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. The high material quality enables reliable clamping of the brake cable. Also available as practical workshop sets (10 pieces) bgm - item number: BGM6482S Availability: in stock [...]

Tool for dismantling the crankshaft Vespa Largeframe -BGM PRO- Made in Germany Disassemble the crankshaft quickly and easily like a professional. This is possible with the quality tool from BGM PRO. With this set, the crankshaft can be pushed out of its press fit in the bearing of the engine housing in a professional and material-friendly manner. The plate with the welded nut facing upwards on [...]

Very nice and high quality rear light with E-marking and therefore completely legal. However, the E-marking only applies to the rear light. As soon as the indicators are connected, you are legally in a gray area. For problem-free operation of the indicators, please order our electronic flasher relay BGM6203 at the same time. Attention: The E-mark only applies to the rear light as soon as the [...]

PRIMARY KIT BGM PRO EXTRA LONG Motors with a lot of torque and an early power peak choose the straight-toothed clutches that also require a straight-toothed primary gear (also available as a set with clutch). This enables very long reductions to be achieved. Also perfectly suitable if the overall transmission ratio is changed in very sporty engines with a modified auxiliary shaft and shorter gear steps.

bgm - Item number: BGM2225BS05 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Cylinder> Spacer Other customers who are looking for Spacer cylinder base -BGM PRO RaceTour- Lambretta SX 200, TV 200, DL / GP 200 - 0.5mm are also looking for: Spacer | Cylinder base | Distance seal [...]

BGM PRO Double Layer Filter made by Marchald for Polini CP carburettors Extra short air filter especially for the popular CP carburetor series from Polini. With a depth of just 30mm, it is perfectly suitable for Vespa Wideframe or laminated boards. The 55mm version is also a very nice option for Vespa Smallframes. Form specially manufactured for BGM especially for the CP [...]

We carry indicator glasses from Piaggio, Siem, Triom as well as Bosatta and BGM. TRIOM / SIEM Both high-quality manufacturers who manufacture for Piaggio and therefore have an E-mark. The two manufacturers only differ slightly in terms of design and color. For perfect color consistency and fit, read off which manufacturer it is on the indicator body before buying. PIAGGIO Piaggio will [...]

The bgm Pro coupling socket is another innovation in the field of Lambretta coupling technology. A high-quality, special material always ensures optimal sliding behavior. The socket allows the clutch to be separated very cleanly, and the start-up behavior is optimized. The result is a clean coupling without judder, even with very powerful engines. The socket is made by bgm [...]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]