BGM PRO Superstrong 2.0 CR - the original, now with Ultralube Extremely resilient coupling, very easy to use - Made in Germany The Superstrong 2.0 CR coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and a [...]

bgm - Item number: BGM2105SC Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Exhaust> Exhaust inner pipes Other customers who are interested in clamps for exhaust pipes -BGM PRO Clubman V1.0. 4.0-V1- Lambretta series 3-XNUMX are also looking for: Exhaust manifold clamp | Clamp | Exhaust clamp | Exhaust manifold clamp | Hose clamp [...]

Mocking tool for all cast cylinders with a bore of 32-89 mm. The ideal tool to remove tracks quickly and with on-board resources. Even a cordless screwdriver is sufficient. Move the honing tool evenly and slowly up and down in the cylinder and a beautiful cross-cut decorates the cylinder liner in no time. If the piston has also noticed something, you can carefully [...]

Good tool = good result This is what the German-made tool for dismantling / assembling the drive-side ball bearing (6305) in the Lambretta motor stands for. This means that replacement is not only done quickly but also precisely. To dismantle, heat the bearing in the motor and then simply pull it out with the tool. For mounting the ideally cold bearing in a [...]

bgm - Item number: BGM4750G Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Workshop requirements> Electronics Other customers who are interested in Bougie pipe -UNIVERSAL Ø = 8mm- 5m - gray , also searched for: Bougierohr | Heat shrink tubing | Insulating tube | Electrics | Management | Wiring harness | Cable hose | Cable harness hose [...]

bgm - Item number: 3332467 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Frame> Handlebars> Frame parts Other customers who are interested in mounting set handlebar lower part -BGM ORIGINAL- LML Handlebars for Vespa PX - 4 sockets (used for switching tube and gas tube) are interested, also looked for: handlebar lower part | [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

Complete indicator set with approval (E-mark) incl. Glasses and bulbs, suitable for all Vespa PX and T5 models. They can be used without hesitation in road traffic and do not require registration. The housing and the glass are unfortunately not 100% matching in terms of their contour. As a result, moisture can penetrate the turn signals and fog the glass. Resourceful [...]

bgm - Item number: BGM4590KTWH Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,24 kg Category: Frame> Brakes> Frame parts Other customers who are looking for cover brake pump set -BGM PRO, without Mirror holes- Vespa GTL125 / 200 (ZAPM311, ZAPM312), GTS125 (ZAPM313), GTS250 (ZAPM451), GTS300 (ZAPM452), GTS ie Super125 (ZAPM453), GTS ie Super300 [...]

Front bgm shock absorber with 16-way adjustable pressure level regulation. Developed as an upgrade for all Vespas with separate shock absorber and spring units. Direct replacement, therefore easy to install. No modifications necessary. Wide adjustment range of the pressure level. In this way you can adjust the compression speed perfectly to your driving style. Hard anodized CNC housing. No registration requirement for pure shock absorbers without spring, therefore without TÜV [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

With the Sport and Competition line, BGM Pro has two high-quality shock absorber series in its delivery program. Both have in common the perfect workmanship, the high material quality and approval by means of ABE. Despite their high resilience, the dampers are very light, as they are made of high-strength CNC aluminum and have excellent surface protection made of hard anodized aluminum. The front [...]