BGM clamping plate sets as well as their individual parts are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. The high material quality enables reliable clamping of the brake cable. Also available as practical workshop sets (10 pieces) bgm - item number: BGM6482S Availability: in stock [...]

bgm - Item number: BGM6010S20 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Gearbox> Shims Other customers who are looking for gear shims -BGM ORIGINAL- Lambretta Series 1-3 - 2,00mm are interested, also looked for: Gear shim | Thrust washer | Washer gear | Gear disc | Spacer [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

BGM PRO Superstrong - the original Extremely resilient coupling, very easy to use - Made in Germany The Superstrong coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and extremely high torsional rigidity. It offers a [...]

Upgrade kit for the primary reduction of all Vespa largeframe engines, e.g. Vespa Sprint, Rally, PX, Cosa, or T5. The set has reinforced shock absorber springs. This counteracts the high torque of modern engine concepts with a correspondingly increased spring rate. This means that the series springs no longer block and prevent load change peaks from affecting the clutch or the motor housing.

Perfectly matching new edition of the leg shield edge protection for the Vespa PK50 S, PK80 S, PK125 S and PK125 ETS models. The PK S / PK ETS models have, compared to all other models, an inverted flanging of the leg shield edge. The PK S / ETS-specific edge protection was therefore not available for years. The edge protection is available in: Silver (PK S [...]

bgm - Item number: BGM6606GTS Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Frame> Electronics> Turn signals Other customers who are looking for cable adapter kit for turn signal conversion -BGM PRO update 2003-2013 => 2014- Vespa GTS 125-300 rear - used for indicators from 2014 onwards in vehicles before 2014 are interested, [...]

Front brake drum 9 "+ 10" -BGM PRO cast iron- Vespa V50 R (V5A1T to No. 752188), V50 N, V50 S, V50 L, SR50, V90 brake drum "Made in Germany" by Strohspeed for BGM PRO. Suitable for all Vespa V50 models with 4-hole rims. Made of high-quality cast iron, it offers enormous advantages over conventional brake drums made of thin [...]

Lambretta bgm PRO MRB RaceTour piston kit with 70 mm diameter. Complete piston kit consisting of: piston, two steel piston rings each 1mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is primarily intended as a replacement piston for the bgm RaceTour cylinder, but can also be used as a conversion piston.

Complete set to match your indicators and the taillight perfectly to the look of the scooter. With a few, easy-to-use hand movements, you get a great look! bgm - Item number: K070120 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,18 kg Category: Frames> Electronics> Indicator glasses [...]

bgm - Item number: BGM16C10 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor> Cylinder> Piston clips Other customers who are interested in piston clip set -BGM PRO 16mm x 1,00 , 2200mm- C-Type (BGM2225N / BGMXNUMXN) also searched for: Piston clip | Piston lock | Clip | Backup | Piston | Safety clip [...]