BGM Pro gear parts are ultra-solid material. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest demands. The very good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. Better than Piaggio Ware. Always consistently high quality. No compromise. BETTER Usable for all [...]

Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]

bgm - Item number: SC4010 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Frame> Tank> Seals Other customers who are interested in sealing sight glass fuel tap -BGM ORIGINAL 26.5x35x4mm- Vespa Wideframe VN, VM, ACMA cork are also interested in: Seal | Tank | Frame | Sight glass [...]

Front headlights with 2x 35 watt halogen power! Suitable for Yamaha Aerox / MBK Nitro. The headlight unit not only brings you an extremely bright and brilliant light, the optics are also much more modern and adult than the old series headlights. The lamps can be switched separately. With E-mark (can be used in traffic without registration)! bgm - Item number: BGM5091 Availability: [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

bgm - Item number: 3333084 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacer Other customers who are interested in Spacer cylinder head -BGM ORIGINAL Polini / DR / Parmakit 177 cc- Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-) - [...]

bgm - Item number: BGM6412CC Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,21 kg Category: Frames> Cables> Cables Other customers who are interested in clutch cable -BGM ORIGINAL- Vespa PX (- 1984), Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), GT125 (VNL2T), GTR (VNL2T), TS125 (VNL3T), GL150 (VLA1T), GS160 / GS4 [...]

Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

As an upgrade for all standard Lambretta benches of the Li family. Seat cushion (foam) -BGM PRO- Lambretta LI, LI S, SX, TV, DL, GP - for standard seat bgm - item number: 3330894 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 , XNUMX kg Category: Frame> Seats> Seat covers Other customers, [...]

BGM PRO speedometer cables correspond to the factory specification and impress with their high quality and low price. All speedometer cables have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as a high-quality outer shell or a properly pressed square. The installation of the already greased speedometer cable is easy.

The bgm PRO Racing shaft is designed as a stable shaft for ESC class 1 drivers. With a 51mm stroke, 97mm connecting rod length and a sturdy Ø24mm alternator stub, as a full-cheek shaft, it offers ideal conditions to fully exploit the limits of this racing class. The large crank webs offer significantly more overlap over the crank pin, resulting in a higher pressing dimension and thus [...]