BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Float needle BGM PRO Viton ® for Dell'Orto carburettor The float needle regulates the flow of petrol into the carburettor. If the float needle is defective, the carburetor overflows and the gasoline drips onto the floor and / or into the engine. The result is often a poorly starting and smoking engine. If the carburettor is revised, it is therefore useful [...]

Exhaust spring -ANTI RATTLE- stainless steel - 50mm: Stainless steel spring anti-vibration rubber Both heads can be rotated 360 ° Here you will find the luxury version of the exhaust springs, easy to hang in, rust-free and thanks to the rubber coating, completely rattle-free. bgm - Item number: BGM0903 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Exhaust [...]

Kickstater shaft for Peugeot, Honda and Kymco In very good OEM quality bgm - Item number: 06555741 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,18 kg Category: Motor> Gearbox> Kick starter shafts Other customers who are interested in kick starter shaft -BGM ORIGINAL- Peugeot 50 cc, Honda 50 cc, Kymco 50 cc, [...]

Diaphragm plates are subject to natural wear, similar to piston rings and clutch shoes. The membrane plates should therefore be replaced at regular intervals. With the bgm ORIGINAL membrane blocks we offer you a cheap replacement in original equipment quality. Since everything is already pre-assembled, the change is quick and easy even for inexperienced screwdrivers. bgm - Item number: R100560020 Availability: on [...]

This can block the piston. Is often used to adjust the ignition with the reversal measurement method. bgm - Item number: 3333678 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Motor> Tools> Tools Other customers who are interested in piston stoppers short-M14 x 1,25- (Type NGK E-candle) - Vespa [...]

bgm - Item number: BGM6887S30 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Rubber parts> Carburettor connecting rubbers Other customers who are interested in connecting rubber with flange inlet system -BGM ORIGINAL Smart Flow- AW = Ø30mm, hole stitch = 60mm - PHBL25, TMX24 are interested, also looked for: connecting rubber | Flange | Carburetor [...]

bgm - Item number: BGM6476B Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 2,40 kg Category: Workshop requirements> Trains Other customers who are interested in outer cover -BGM ORIGINAL, PE inner cover- Ø outside = 6mm (l = 25 meters) - interested in black, also looked for: outer shell | Train | Coat | Outer cable | [...]

bgm - Item number: BGM6010S23 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Gearbox> Shims Other customers who are looking for gear shims -BGM ORIGINAL- Lambretta Series 1-3 - 2,30mm are interested, also looked for: Gear shim | Thrust washer | Washer gear | Gear disc | Spacer [...]

High-quality CNC sport levers from bgm PRO for vehicles with hydraulically operated front disc brakes with HengTong type brake pump. Suitable for Vespa PX built in 2004-today. Milled from solid aluminum, with an elegant, hard-wearing hard anodized surface. Ergonomically much better than the original levers, they offer better performance and feedback. Also ideal for braking with only two [...]