bgm - Item number: SC4010 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Frame> Tank> Seals Other customers who are interested in sealing sight glass fuel tap -BGM ORIGINAL 26.5x35x4mm- Vespa Wideframe VN, VM, ACMA cork are also interested in: Seal | Tank | Frame | Sight glass [...]

bgm - Item number: BGM9020TL Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,38 kg Category: Engine> Exhaust> Tools Other customers who are interested in assembly tool outlet nozzle -BGM PRO- Vespa PX200, GS160 / GS4 (VSB1T), SS180 (VSC1T), Rally180, Rally200, Cosa200 (only with gray cast iron cylinder) were also looking for: Assembly tools [...]

BGM ORIGINAL stud bolt for fastening the cylinder and cylinder head to the engine housing SUITABLE Suitable for Vespa largeframe engines from 160ccm displacement (ex works), e.g. Vespa PX200, Rally180 / 200, GS160, SS180, Cosa200. Can also be used in the engines of the Lambretta series 1-3 models. SPECIAL FEATURES ROLLED THREAD The thread of the cylinder stud bolts is rolled, not cut. The BGM ORIGINAL [...]

When good things get even better, the bgm PRO Lambretta waves are now the bgm PRO Competition waves. The features that have proven themselves have remained, important technical details have been further improved. Improved features are: Ground pressing surfaces for maximum stability of the joint connection and thus the highest possible security against twisting Ground and coated crankpin Forged connecting rod with CNC finishing [...]

bgm - Item number: BGM8010GLI Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,18 kg Category: Motor> Clutch> Clutch pressure plates Other customers who are interested in disc for clutch pressure plate -BGM PRO Superstrong 10 Springs - Lambretta - Type LI are also interested in: Pressure plate | Clutch | Plate | [...]

bgm - Item number: SC2301 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,71 kg Category: Engine> Carburetor> Carburetor Other customers who are interested in O-ring for carburetor -DELLORTO 20 / 20mm SHB- Vespa PK125 XL2, also searched for: O | Ring | Oring | Sealing ring | Sealing rubber | [...]

Latest version of the proven BGM PRO HP (High Power) ignition base plate for electronic ignition. BGM has revised the well-proven BGM PRO ignition base plate and made it even better. A significantly higher light output than with conventional base plates is complemented by the very high quality of the coils and pick-up. In addition, the cabling was converted to textile-coated silicone cables. Another one [...]

Three-part BGM precision roller bearing for the main shaft bearing on the gearshift side of Vespa VNA, VNB, VBB, Super, Sprint, GT, GTR All 125 / 150cc Vespa engines with horizontal cylinder (from approx. Year of construction 1957), starting with the VNA models with direct suction via a multi-part main shaft bearing on the switch latch side. This consists of a bearing shell, individual rollers and an open bearing cage. [...]

Universal fuel tap (hose fuel cock) for fuel hoses with 6 or 8 mm inner diameter. Impressively simple fuel tap solution! bgm - Item number: 8006594 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Frame> Tank> Fuel taps Other customers who are interested in fuel tap -BGM ORIGINAL- universal hose fuel tap - Ø = 6mm interested, looked [...]

bgm PRO air filter box for the Lambretta series 1-3. The starting point is a SIL air filter box. A connection piece to the frame with a diameter of 50 mm is hard-soldered into this. The diameter of the airbox corresponds to that of the frame. The box and the air filter connector are powder-coated in white. All additional work has been carried out on site in Cologne. Included [...]

bgm - Item number: BGM8801Y Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Motor> Clutch> Springs Other customers who are interested in clutch spring set for clutch BGM PRO Superstrong - BGM PRO XXL- Vespa V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 [...]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]