High quality new edition of the cable box for the classic Vespa PX models up to 1984. Installed under the horn cascade. Not available from Piaggio for a long time, we have had them reproduced in a very good quality. High quality plastic, exactly 1: 1 like the original. bgm - Item number: 1163603 Availability: in stock (Please check the availability here in the Scooter [...]

Adjustment screw set, suitable for the PHBN carburetor series from Dell'Orto (all from 10mm-17,5mm cross-section). Contains both the propeller and the idle screw. Incl. the springs and O-rings / seals behind it. For carburettors with a holder for an e-choke. The PHVA series is mainly used on vehicles with a Piaggio engine bgm - item number: 7673420 Availability: in stock (Please check [...]

Bgm Pro harness, better than original. Every cable harness is professionally manufactured and has solidly pressed (crimped) cable lugs. Where appropriate, they are also provided with protective shrink tubing. Loose wire ends are tinned, with the exception of the cable branch that leads to the light switch with screw clamps. For the greatest possible freedom of assembly, the cables are a little longer than required. Here [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

The bgm EVOLUTION crankshafts are racing shafts of the highest quality. The completely forged shafts are finely balanced full metal shafts. Both the crank webs and the connecting rod are forged. This gives the wave an incredible resilience. In order to achieve the highest possible weight, which is extremely important for low-vibration engine operation, the shafts were [...]

abcd A 02 2,00 0,60 20,00 12,00 A 07 2,00 1,00 18,00 14,00 A 10 2,02 0,60 18,00 14,00 A 11 2,02 0,60, 20,00 12,00 12 A 2,00 1,79 20,00 12,00 13 A 2,00 1,79 22,00 10,00 14 A 2,02 1,00 18,00 14,00 15 A 1,98 1,77 20,00 12,00 18 A 2,04 XNUMX [...]

bgm - Item number: 4350002 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Frames> Cables> Cables Other customers who want universal train inside -Ø = 1,2mm x 2500mm, nipple Ø = 3,0mm x 3mm- used as throttle cable - turned interested, also looked for: Zug | Universal | [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

The membrane of the type RD 350 are an absolute classic in the scooter area. They offer a great compromise between incredible durability and official performance values. The RD 350 membrane has proven itself so well with us for years that we are now offering a bgm RD350 block with GRP plates. The GRP plates are designed for optimal response [...]

The bgm PRO Superstrong clutch linings in the "Racing Red" version are among the best-performing linings on the market. The heavy-duty organic pad mixture is created for the high pressures and high temperatures in racing. The high-quality covering material is thinner than a conventional cork covering. This enables the installation of an additional friction disc in the entire Racing Red pad package. Semi-organic covering material [...]

Speedometer BGM PRO 160km / h for Vespa PX (years of construction 1977-1984) The BGM PRO speedometer has a precise eddy current measuring mechanism with a display range of up to 160km / h (series speedometer = 120km / h). It replaces the factory-installed speedometer 1: 1. Today's engine and transmission technology enables concepts that bring the series tachometer to its limit in third gear. The BGM Pro [...]