Lambretta bgm PRO MRB RaceTour membrane piston kit with 65 mm diameter. Complete piston kit consisting of: piston, two steel piston rings a 1 mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is the perfect choice if you have converted your RT 195 cylinder to diaphragm control and have a durable [...]

Adjustment screw set, suitable for the PHBN carburetor series from Dell'Orto (all from 10mm-17,5mm cross-section). Contains both the propeller and the idle screw. Incl. the springs and O-rings / seals behind it. For carburettors with a holder for an e-choke. The PHBN series is mainly used on vehicles with Minarelli engines bgm - item number: 7673422 Availability: in stock (Please check [...]

BGM Pro Sport tires (3.50-10) fully assembled on aluminum sports rim BGM Pro tubeless (2.10-10) Ready-to-assemble tire set consisting of the first-class BGM Pro sports tires with a speed index S (approved up to 180km / h) and a load index of 59 (243kg per Tires) as well as the exclusive BGM Pro light alloy wheel *. SUITABLE The set is available on all Lambretta series 1-3 models as well as [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

The BGM PRO ignition set made of high-quality components for a quick conversion of the Vespa to a maintenance-free, powerful and reliable ignition / generator unit. FEATURES Conversion from contact ignition to electronic ignition bright light already in idle voltage-stabilized 12 volt on-board network maintenance-free and reliable electronic ignition starts immediately good concentricity lighter, balanced pole wheel more power better acceleration alternator [...]

The BGM PRO ignition set made of high-quality components for a quick conversion of the Vespa to a maintenance-free, powerful and reliable ignition / generator unit. FEATURES Conversion from contact ignition to electronic ignition bright light already in idle voltage-stabilized 12 volt on-board network maintenance-free and reliable electronic ignition starts immediately good concentricity lighter, balanced pole wheel more power better acceleration alternator [...]

BGM flywheel nuts are made from high quality 42CrMo4. This material is extremely tensile and clearly surpasses the quality of the original nut. A tight fit of the pole wheel is ensured at all times by the high possible tightening torque. Tightening torque pole wheel nuts M10 / M11 (V50, PV, ET3, PK S, Sprint, VBB ...): 45-50 Nm M12 (PX, Rally, GS160, SS180, T5, Cosa, PK XL): 60-65 [... ]

BGM ignition base plates and ignition kits are the solid basis for a high-quality engine. The powerful alternator guarantees perfect light output, the HQ ignition components a clean and powerful engine, the BGM pole wheel an extremely quiet engine run. Ideal for upgrading a decrepit, contact-controlled electrical system to a modern, maintenance-free high-performance ignition. ADVANTAGES: High light output thanks to maximum number of windings Proven excitation coil [...]

Front bgm shock absorber with 16-way adjustable pressure level regulation. Developed as an upgrade for all Vespas with separate shock absorber and spring units. Direct replacement, therefore easy to install. No modifications necessary. Wide adjustment range of the pressure level. In this way you can adjust the compression speed perfectly to your driving style. Hard anodized CNC housing. No registration requirement for pure shock absorbers without spring, therefore without TÜV [...]

BGM Pro cable branch to supplement the BGM Pro conversion wiring harness for use with a Vespatronic ignition. PROBLEM The cable colors of the Vespatronic ignition differ greatly from the conventional color scheme of a Piaggio cable harness for electronic ignitions (which is also continued in the BGM Pro conversion cable harness). Piaggio / BGM use green (engine off), blue (luminous flux), black (ground). SOLUTION The BGM Pro cable branch [...]

NOTE: According to StVZO §56, every motor vehicle in Germany, which also includes mopeds, requires at least one mirror attached to the left side of the vehicle. NUMBER The number of mirrors depends on the first registration (EZ): EZ before 01.01.1990 1 mirror left EZ from 01.01.1990 up to 100 km / h 1 mirror left EZ from 01.01.1990 over 100 km / h 2 [... ]

Cracked! A pull rope can digest incredibly large loads. The tear limit of the trains we offer is several tons of pulling force. In a pinch you can even tow cars with it. Why a train breaks anyway depends on the fact that it is loaded incorrectly. Zugkiller No. 1 is the so-called common cast ridge. The brake-clutch levers are often [...]