BGM Pro Sport tires (3.50-10) fully assembled on aluminum sports rim BGM Pro tubeless (2.10-10) Ready-to-assemble tire set consisting of the first-class BGM Pro sports tires with a speed index S (approved up to 180km / h) and a load index of 59 (243kg per Tires) as well as the exclusive BGM Pro light alloy wheel *. SUITABLE The set is available on all Lambretta series 1-3 models as well as [...]

bgm - Item number: 7674257 Availability: In stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Workshop requirements> Hose clamps Other customers who are interested in hose clamps (10 pieces) -UNIVERSAL- 25-40mm - Are interested in bandwidth = 9mm, also looked for: hose clamp 10

PRIMARY KIT BGM PRO EXTRA LONG Motors with a lot of torque and an early power peak choose the straight-toothed clutches that also require a straight-toothed primary gear (also available as a set with clutch). This enables very long reductions to be achieved. Also perfectly suitable if the overall transmission ratio is changed in very sporty engines with a modified auxiliary shaft and shorter gear steps.

Side shaft BGM PRO for Vespa Largeframe PX, Rally, T5, Cosa, LML (2-stroke) Maximum stability with the best performance thanks to ideal gradations Modern cylinders such as Malossi MHR, Quattrini M244 or Pinasco 251 have the power and torque level of the Vespa largeframe motors at one Raised a completely new level. The transmission components used must be correspondingly stable. MATERIAL QUALITY The BGM PRO [...]

Lambretta cylinder base gasket with a thickness of 1,0 mm for the large engine blocks with 200-250 ccm displacement. Ideal to compensate for connecting rod lengths, differences in the heights of the engine sealing surfaces, twisted cylinders or to be able to experiment with the control times. The size of the overflow channels is dimensioned so that it corresponds to the standard overflows. Ideally, this should match the engine block and cylinder.

Tapered roller bearings have a larger contact surface and are therefore significantly more resilient than conventional factory solutions with ball bearings. Tapered roller bearings can cope with the high loads of powerful braking systems much better and are also much more wear-resistant. They increase active driving safety by ensuring the ideal state of smooth, non-locking steering for a very long time. A criterion that [...]

Grip, cornering, directional stability, handling, wheelspin, braking behavior? All of these are demands that your chassis must be able to cope with. bgm offers the right damper for every application. The bgm PRO series offers you high tech at its best. You can not only adjust the spring tension of the black and white gas pressure shock absorbers to your individual needs, they also offer you [...]

bgm - Item number: BGM4508 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frames> Brakes> Brake-clutch levers Other customers who wanted brake lever set -BGM PRO CNC Sport, short (130mm) - Vespa LX, LXV, S, Primavera 50-150, Sprint50-150 - chrome are interested, also looked for: brake levers | Brake handle [...]

BGM Pro Spezial crankshaft bearings with narrow shoulder width for Vespa Wideframe engines These bearings should be used if the high-quality Corteco shaft sealing rings are to be installed at the same time. The Corteco shaft seals have a greater material thickness than the previously common shaft seal carriers (0.8mm instead of 0.5mm sheet metal thickness). The narrower bearing shoulders of the BGM PRO bearings compensate for the thicker sheet metal [...]

bgm - Item number: BGM7751B Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 1,46 kg Category: Frame> Shock absorbers> Shock absorbers Other customers who are interested in front shock absorbers -BGM PRO SC / F1 SPORT , 275mm- Vespa Primavera 50 (2013-2016), Vespa Primavera 125 (2013-2016), Vespa Primavera 150 (2013-2016), Vespa Sprint 50 (2013-2016), [...]

Air filter fleece BGM PRO for Motovespa Largeframe models 125-160cc High quality filter fleece from Marchald (Italy), manufactured for BGM PRO. Suitable for the direct intake engines (carburetor sits directly on the cylinder) of the largeframe Motovespa engines. 1: 1 replacement for the original wire mesh. Significantly better and finer filtering with a higher air flow rate at the same time. Therefore also ideal for engines that have already been upgraded. [...]

The BGM Pro switch cross is a fine material for high demands. Made from high quality 15CrMo5 (SCM415) chrome molybdenum steel. The BGM gearshift cross is very robust, but offers elasticity to protect the button in the gear wheel. Better than original goods. Always consistently high quality. Can be used for all types of stress, regardless of whether touring or racer. bgm - Article number: BGM6501L Availability: [...]