bgm - Item number: BGM6010S19 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Gearbox> Shims Other customers who are looking for gear shims -BGM ORIGINAL- Lambretta Series 1-3 - 1,90mm are interested, also looked for: Gear shim | Thrust washer | Washer gear | Gear disc | Spacer [...]

20-piece trim screw set. The kit contains 20 pieces each. Screws with pan head and tapping screw thread as well as 20 pcs. Speed ​​nuts. Ideal for connecting the vast majority of trim parts on, for example, Piaggio / Gilera / Yamaha / MBK / Aprilia vehicles. Dimensions: Screws: Ø screw head: 10mm Ø thread: 4,2mm screw length (without head): 12mm sheet metal nuts: length: 17mm width: 11mm bgm - item number: 7673430 Availability: in stock (Please check [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]

Perfectly coordinated carburetor kit. The scope of delivery includes the bgm PRO 17 carburetor, the bgm PRO intake manifold and all the small parts required for assembly. The bgm PRO carburetor is super easy to tune. The PHBN series is widespread and so all tuning parts are readily available. The open BGM PRO intake manifold is perfectly matched to the carburetor. CONCLUSION: [...]

Ignition coil -BGM PRO- Peugeot 50-100ccm, Honda 50ccm, Kymco 50ccm. bgm PRO Racing ignition coil with high-end secondary winding. With this coil, the secondary voltage is almost doubled. The standard ignition voltage of the original ignition coil is around 16.000V. With the race high tension coil ignition coil from BGM PRO we achieved an ignition voltage of a full 31.000V !!! The advantage is [...]

The Cosa clutch springs are available in different spring rates to adapt the clutch to the respective purpose. The rule of thumb for spring stiffness is: as hard as necessary, as soft as possible. General statements on the relationship between engine power / torque and spring stiffness can only be made approximately precisely. Especially since the number of springs used also plays an extremely important role [...]

bgm - Item number: SCK1801L Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Clothing> T-Shirts Other customers who are interested in T-Shirt -BGM Supercharged- black - L are interested also searched for: Tshirt | Maglietta | Tshirts | Clothing | Present | Gift | Gift idea | Christmas gift [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Practical quick coupling that is mounted in the fuel hose. If, for example, the tank or the carburettor is to be removed, the hose at the coupling is disconnected. The internal valves prevent fuel leakage on either side of the clutch. They can be separated quickly at the push of a button with just one movement and can be easily closed again by sticking them together. [...]

Carburetor -PHVA 17,5- Piaggio 50ccm. The PHVA carburettors are a constant in the scooter sector. They are characterized by easy assembly and good tunability. If a DellOrto PHVA carburettor is already installed on the vehicle, changing to a larger one of the same type is possible without any problems. The PHVA 17,5 mm helps all 70s [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]