Coupling holder for all MMW Hartz coupling types. Version 2.0 is no longer supported by the motor housing, but by a ratchet nut (attached to the primary pinion nut). Galvanized steel version. We recommend BGM Pro Street gear oil (BGM2025, corresponds to specification API GL-3) as a lubricant. bgm - item number: 7675464N Availability: in stock (Please check availability here in the Scooter Center [...]

bgm - Item number: 3330285 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Gaskets> Gaskets Other customers who are looking for gasket cylinder head -POLINI 133 ccm Evolution- Vespa PV125, ET3 125, PK125 - 0,8mm are interested, also looked for: Seal | Cylinder head | Head gasket | Cylinder head gasket [...]

Gearbox from BGM Pro for Vespa largeframe engines. Available with or without a main shaft. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest loads. This extremely good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion permanently resistant to wear. This makes the BGM gear parts an uncompromising [...]

Cracked! A pull rope can digest incredibly large loads. The tear limit of the trains we offer is several tons of pulling force. In a pinch you can even tow cars with it. Why a train breaks anyway depends on the fact that it is loaded incorrectly. Zugkiller No. 1 is the so-called common cast ridge. The brake-clutch levers are often [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

The BGM Pro claw is made of high quality 15CrMo5 (SCM415) chrome molybdenum steel and is therefore very robust. The flanks are very tightly tolerated compared to the switching claws otherwise available on the market. This guides the claw exactly in the main shaft and effectively prevents setting / tipping. The profile for locking the gear steps has been greatly improved and [...]

Complete indicator set with approval (E-mark) incl. Glasses and bulbs, suitable for all Vespa PX and T5 models. They can be used without hesitation in road traffic and do not require registration. The housing and the glass are unfortunately not 100% matching in terms of their contour. As a result, moisture can penetrate the turn signals and fog the glass. Resourceful [...]

You can use the pins to block the clutch bell in order to loosen the clutch nut. The large nut of the coupling can be removed with the inner hexagon key. bgm - Item number: BU5427 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,27 kg Category: Motor> Clutch> Tools Other customers who [...]

Complete set to match your indicators and the taillight perfectly to the look of the scooter. With a few, easy-to-use hand movements, you get a great look! bgm - Item number: K070220 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,44 kg Category: Frames> Electronics> Indicator glasses [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: 3330401 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Workshop requirements> Electronics Other customers who are interested in cable lug ring eyelet 6,5mm Ø = 1,0 -1,5mm²- 10pcs. interested, also searched for: cable lug | Electrics | Connection | Cable | Cable connector | Flat plug | Ring eyelet | Round connector | [...]

Cable branch for the handlebars of the Vespa PX models up to 1984 in Italian design, without battery. These can be recognized by the ignition lock with a white plastic housing in the handlebar cover. Supplement to the vehicle wiring harness. Can be used for all models without a battery and four connections on the ignition lock (the German version with a battery has eight connections). bgm - Item number: SC5006HB Availability: in stock [...]