bgm - Item number: BGM6887S35 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,09 kg Category: Engine> Rubber parts> Carburettor connecting rubbers Other customers who are interested in connecting rubber with flange inlet system -BGM ORIGINAL Smart Flow- AW = Ø35mm, hole stitch = 60mm - PHBH28 / 30, VHST24-26, VHSH30, TMX27-30, TM28, PWK28, Polini24-30 are interested, also looked for: [...]

Solid BGM crankshaft for the PX80 models. The PX80 was manufactured for the German market and has a stroke of only 48mm (PX125 = 57mm). The most common damage to the PX80 engines is a defective lower connecting rod bearing, mostly caused by long idle times or worn connecting rod thrust washers. The BGM crankshaft has a solid bearing and [...]

bgm - Item number: BGM0223S15 Availability: out of stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacer cylinder base -BGM ORIGINAL- Vespa V50 , PV125, ET3, PK50, PK80, PK125 - 1.5mm, also searched for: Spacer | Cylinder base | Distance seal [...]

bgm - Item number: SC5012 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Rubber parts> Rubber parts Other customers who are interested in rubber hose for cable ignition base plate -BGM ORIGINAL- Vespa PK interested, also looked for: rubber hose | Cable | Ignition stator | Hose | Cable rubber | Ignition rubber [...]

bgm - Item number: SCK1801L Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Clothing> T-Shirts Other customers who are interested in T-Shirt -BGM Supercharged- black - L are interested also searched for: Tshirt | Maglietta | Tshirts | Clothing | Present | Gift | Gift idea | Christmas gift [...]

BGM PRO speedometer cables correspond to the factory specification and impress with their high quality and low price. All speedometer cables have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as a high-quality outer shell or a properly pressed square. The installation of the already greased speedometer cable is easy.

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

Small antique metal rear light that cuts a fine figure on many Vespas. Very high quality reproduction with a solid metal die-cast housing. Comes complete with a black rubber seal and both 6 V and 12 V lamps. bgm - Item number: BGM5033 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

Screw for attaching the luggage compartment / glove compartment to the frame. Is inserted from the fender side below the cascade through the holes in the main frame and countered on the back. TIP: The PX models use a total of 4 screws. The older models such as Rally, Sprint etc. only use this type of screw for the lower fastening straps, ie here only 2 [...]

Front brake drum 8 "incl. Brake shoes -BGM PRO cast iron- Vespa Wideframe V1-15, V30-33, VU, VM, VN, VL, VB, VBA, VBB, VNA, VNB, ACMA, Hoffmann front brake drum" Made in Germany " by Strohspeed for BGM PRO. Suitable for all Vespa models with 8 inch tires (not Vespa Super VNC / VBC). Made of high quality cast iron, it offers enormous advantages over [...]

High-precision BGM PRO auxiliary shaft axis for the bearing of the primary drive of the Vespa PX125-200 models. Made from extremely resilient and tempered 42CroMo4V steel. Qualitatively not comparable with cheaper replicas. This means that the primary drive can be repaired with 100% factory specifications. Mandatory equipment for tuned engines. INFO: The auxiliary shaft axle has a bearing surface on which the needles of the alternator-side [...]