The pistons of the BGM177 cylinder are manufactured by the renowned Italian piston manufacturer METEOR. The piston has a high silicon content. As a result, it has less thermal expansion, is more wear-resistant and thermally very stable. PISTON RINGS Two 1mm thick piston rings, also made in Italy, minimize friction and thus increase performance and speed stability. Otherwise they are identical [...]

bgm - Item number: BGM4510 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,30 kg Category: Frames> Brakes> Brake-clutch levers Other customers who wanted brake lever set -BGM PRO CNC Sport, long (165mm) - Vespa LX, LXV, S, Primavera 50-150, Sprint50-150 - black matt are interested, also looked for: Brake levers | [...]

Intake manifold BGM PRO for Dellorto PHBL24 / 25, Polini CP23 / 24 carburettor Suitable for Vespa GS150 (VS2 to VS5), GS2 (VD1TS), GS3 (VD2TS) Passage: Ø24mm Connection width: Ø30mm Fastening: 3-hole rubber connection steel, painted black With With this intake manifold carburetors of 24-25mm can be driven and thus the performance of the engine can be increased significantly. The carburetor is backwards in the direction of travel [...]

Latest version of the Lambretta bgm shock absorber. Compared to its predecessor, many details have been further optimized. The biggest innovation is the ability to adjust the height of the shock absorber by 10 mm. This allows additional space to be created between the frame and the suction cup. New features: bushings with silent rubbers mounted progressively wound spring rebound and compression damping with hard marking [...]

Nice spare part that enhances every restoration. Complete with screw and kick starter rubber. Chrome plated. bgm - Item number: SCK709 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,26 kg Category: Motor> Gearbox> Kickstarter Other customers who are interested in Kickstarter Vespa Sprint150 (VLB1T), Sprint Veloce , GT125 (VNL2T), GTR125 (VNL2T), GL150 [...]

The bgm Pro clutch pressure plates are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) and then case-hardened. The precisely defined surface hardening to 58-60HRC makes the plates extremely resistant to wear. The plates are then precisely sanded, so that the pressure pad with a flat and hard surface finds perfect working conditions. The pressure plates are manufactured exactly according to Piaggio original dimensions. Always [...]

BGM Pro Sport tires (3.50-10) fully assembled on aluminum sports rim BGM Pro tubeless (2.10-10) Ready-to-assemble tire set consisting of the first-class BGM Pro sports tires with a speed index S (approved up to 180km / h) and a load index of 59 (243kg per Tires) as well as the exclusive BGM Pro light alloy wheel *. SUITABLE The set is available on all Lambretta series 1-3 models as well as [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

High-quality CNC sports levers from bgm PRO for vehicles with cable brakes at the front. Suitable for Vespa Largeframe models built in 1957-1998: PX, T5, Sprint, Rally, GT, GTR, TS, VNA, VNB, VBB, VBA, GS, SS180 Smallframe built in 1963-1989: V50, 50N, V90, PV125, ET3 , PK S *, PK XL1 * Milled from solid aluminum, with an elegant, resistant, hard-anodized surface. Ergonomically clear [...]

bgm - Item number: 1079157A Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Frame> Fork> Speedometer drives Other customers who are interested in speedometer worm -BGM ORIGINAL- Vespa 9 teeth, l = 31mm, 2,7mm square, black (used in Vespa V50, 50N, 50L, 50R (V5A1T, 9 inch tires) are of interest, [...]