BGM chain sprockets are developed for the enormous powers and torques of today's engines. Made from high-alloy SCM415 / 15 CrMo 5 steel. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) provides a reassuringly secure basis for the production of BGM pinions. The production meets the high standard for transmission production by Honda. Each [...]

The bgm PRO ignition base plates for the Lambretta were one of the first bgm products. The first samples were presented at the Eurolambretta 2007 in Neckarsulm. The base plate is based on the electronic ignition, which was introduced in 1970 with the Lambretta dl 200 electronic, later adapted by Piaggio for the Vespa and which is probably the most widespread [...]

BGM PRO Superstrong 2.0 CR - the original, now with Ultralube Extremely resilient coupling, very easy to use - Made in Germany The Superstrong 2.0 CR coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and a [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Remote air filter system based on the bgm PRO suction hose and a Marchald foam air filter. bgm PRO suction hose with increased volume in front of the carburetor compared to the original suction hose. The intake hose is available with four different connection sizes on the carburetor: 40 mm (e.g. Dellorto PHBL 25), 42mm (Dellorto PHBH 28-30), 45 mm (Mikuni TM24 and Jetex SH22) or 50 mm [...]

bgm - Item number: BGM8880B Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Workshop requirements> Tools Other customers who are interested in hook wrenches for shock absorbers -BGM PRO- for Ø = 50mm interested, also searched for: hook wrenches | Hook | Stretcher

bgm - Item number: 3330287 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Gaskets> Gaskets Other customers who are looking for gasket cylinder head -POLINI 133 ccm Evolution- Vespa PV125, ET3 125, PK125 - 1,5mm are interested, also looked for: Seal | Cylinder head | Head gasket | Cylinder head gasket [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

Noble CNC milled aluminum sports levers with stainless steel screws from the BGM PRO series. 6-way adjustable lever distance to the handlebar. Vertical folding joint, the lever remains intact in the event of a fall! CNC milled from high-strength 6061 T6 aluminum silver / black hard anodized 6-way adjustable grip width Folds away in the event of a fall or tipping over the motorcycle Safety breaking point for a possible further journey if the folding away [...]

The bgm PRO clutch steel disks are manufactured exactly flat and allow the clutch to be separated precisely. Due to the very good concentricity, the clutch can be perfectly dosed. The steel discs are available in the original thickness of 1,5 millimeters and in a sports version with a height of just 1,0 millimeters. The sport version enables the assembly of a lamellar disc, which [...]

Universal fuel tap (hose fuel cock) for fuel hoses with 6 or 8 mm inner diameter. Impressively simple fuel tap solution! bgm - Item number: 8006594 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Frame> Tank> Fuel taps Other customers who are interested in fuel tap -BGM ORIGINAL- universal hose fuel tap - Ø = 6mm interested, looked [...]

CARBURETOR TUNING SET BGM FOR DELL'ORTO PHBH28 / PHBH30 Tuning set for the classic Dell'Orto PHBH series or its replicas (YSN) SCOPE OF DELIVERY Main nozzles: 130,135 Auxiliary nozzles: 58,60 Mixing tube: AS266 Needles: X3, X7, X13 The set offers a very good one Basic set-up for almost all tuned Vespa / Lambretta engines. MAIN JET The main jet oscillates around 130-135 in most engine setups [...]