The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Developed for performance-oriented engine concepts. The fastening should be done with Loctite medium strength WITHOUT a locking plate. The recommended tightening torque is 55-60 Nm. Tried and tested in racing and found to be good. bgm - Item number: 7672106 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Crankshaft> Nuts Other customers, [...]

bgm - Item number: 3330020 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Clutch> Spacer Other customers who wanted spacer set clutch cover -BGM PRO 4- Teilig- V50, PV125, ET3, PK50, PK80, PK125 - 1.0mm are interested, also looked for: Spacer | Set | Clutch cover | [...]

Tapered roller bearings have a larger contact surface and are therefore significantly more resilient than conventional factory solutions with ball bearings. Tapered roller bearings can cope with the high loads of powerful braking systems much better and are also much more wear-resistant. They increase active driving safety by ensuring the ideal state of smooth, non-locking steering for a very long time. A criterion that [...]

Motor housing bolt set that contains all removable motor bolts of the motor housing. The bolts are made of high-strength steel (10.9) and are permanently protected against corrosion by a browning process. Also included are the snap rings, washers and nuts, all of which are galvanized. The set corresponds to the original dimensions used ex works and is a high-quality 1: 1 replacement for the original [...]

bgm - Item number: BGM0190B7 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Gearbox> Primary repair Other customers who are looking for cover plate primary -BGM PRO Ø70mm- Vespa PK50 XL2, PK125 XL2, also looked for: cover plate | Primary | Disc | Cover plate | Cover disk [...]

BGM original suction hose - E10 resistant - for Vespa Largeframe PX, T5, LML 2-stroke The BGM original suction hose has only the best properties: E10 resistant, durable, solid rubber, dimensionally stable The base material is a high-quality elastomer which remains permanently elastic and does not tear. The BGM original suction hose is used between the frame and the air filter box. Due to the fixed [...]

BGM PRO Oldie Edition (vintage tin can) 2-stroke synthetic oil is a first-class and highly resilient two-stroke oil that meets the strict Japanese JASO FC test standard. Based on an excellent base oil, many high-quality additives ensure excellent protection for all components. The high classification as JASO FC makes it extremely low in smoke, perfectly suitable for use in engines [...]

BGM chain sprockets are developed for the enormous powers and torques of today's engines. Made from high-alloy SCM415 / 15 CrMo 5 steel. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) provides a reassuringly secure basis for the production of BGM pinions. The production meets the high standard for transmission production by Honda. Each [...]

bgm - Item number: BGM7908TL Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 1,00 kg Category: Motor> Tools> Tools Other customers who are interested in punch assembly tool for installation of ball bearing auxiliary shaft 6302 -BGM PRO- Vespa PX200, Rally180, Rally200, COSA200, T5 125cc, GS150 / GS3, Hoffmann, T1, T2, T3, GL [...]

BGM Pro Sport bench made by Nisa Italy Based on the very popular Nisa 'Sport 20' bench, we had a BGM version made by NISA. AUTHENTIC LOOK The BGM Pro Sport bench has a beautiful Alfatex cover (embossed waffle pattern) on the sides and back and is also available with gray piping. The seat is also [...]

Practical quick coupling that is mounted in the fuel hose. If, for example, the tank or the carburettor is to be removed, the hose at the coupling is disconnected. The internal valves prevent fuel leakage on either side of the clutch. They can be separated quickly at the push of a button with just one movement and can be easily closed again by sticking them together. [...]