bgm - Item number: BGM4503 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,30 kg Category: Frames> Brakes> Brake-clutch levers Other customers who wanted brake lever set -BGM PRO Sport , long- Vespa GT, GTL, GTS 125-300 - black are interested, also looked for: brake lever | Brake handle | Lever | Handlebar lever [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM7811ADJ Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frames> Brakes> Brake pumps Other customers who are interested in adjusting wheel for lever brake pump -BGM PRO Radial- Piston Ø = 12,7mm- interested, also looked for: brake pump | Radial | Pump | Hand brake pump | Brake fitting | [...]

BGM PRO Superstrong clutch linings type CR The BGM carbon clutch linings have an organic lining material with very good grip. It offers an ideal balance between performance and durability. The CR single lining is provided with lining material on both sides and therefore fits the following clutch types: Lambretta LTH Liedolsheim (7x) Vespa Smallframe MMW Hartz4 (4x) Vespa Smallframe MMW Hartz5 [...]

Water pump -BGM PRO- Universal, 12V, delivery rate 8l / min. A must for sprinters. The external water pump. At over 14.000 rpm, the mechanical water pumps are too fragile and also cost valuable performance. Water pump BGM Pro, CNC manufactured, massive pump body and paddle wheel. Connection: 12V DC (direct current) Pump power 8l / min Hose connections: Ø15mm Current consumption: 0,15A Speed: 3200U / min Watt: 3,52W bgm - Item number: [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

bgm - Item number: BGM4506 Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,30 kg Category: Frames> Brakes> Brake-clutch levers Other customers who wanted brake lever set -BGM PRO Sport, short- Vespa LX, LXV, S, Primavera 50-150, Sprint50-150 - black are interested, also looked for: brake levers | Brake handle | [...]

bgm - Item number: 7675166 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Workshop requirements> Electronics Other customers who are interested in insulating tubing for cable lug round plug-in sleeve 4mm Ø = 0,5 -1,0mm²- 10pcs. interested, also searched for: insulating tube | Bougie ear | Grommet | Cable grommet | Conduit | Conduit | Cable conduit | [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]

bgm - Item number: BGM7929TL Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Clutch> Tools Other customers who are interested in castellated wrenches clutch nut -BGM ORIGINAL- Vespa Largeframe ( up to 1995), also searched for: Crown nut wrench | Coupling nut | Crown nut wrench | Clutch tool | Wrench | [...]