Compact voltage regulator for all alternators with 6 volt on-board voltage. The power supply of older vehicles with 6V voltage is often designed as a so-called self-regulating system. Only the resistance of the bulbs prevents overvoltage and thus the lamps from burning out. Such a simple electrical system unfortunately always harbors the risk that a defective pear will also cause all [...]

Conversion wiring harness for retrofitting to: PK alternator or PK motor in 50N special with indicator (angular steering head) The conversion to a more modern alternator / ignition type is a tried and tested means to be on the road more permanently and safely. The non-contact CDI ignitions are almost indestructible and reliable, as is the light output with a modern, regulator-supported, on-board electrical system.

When good things get even better, the bgm PRO Lambretta waves are now the bgm PRO Competition waves. The features that have proven themselves have remained, important technical details have been further improved. Improved features are: Ground pressing surfaces for maximum stability of the joint connection and thus the highest possible security against twisting Ground and coated crankpin Forged connecting rod with CNC finishing [...]

High-quality CNC sport levers from bgm PRO for vehicles with hydraulically operated front disc brakes with Grimeca or LML brake pumps. Suitable for Vespa PX from 1998-2003 as well as all LML vehicles / brake pumps. Milled from solid aluminum, with an elegant, hard-wearing hard anodized surface. Ergonomically much better than the original levers, they offer better performance and feedback. Also ideal [...]

bgm - Item number: 7674074 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor> Crankshaft> Shim washers Other customers who are looking for a Shim -DIN 988 similar- 31x26x1,0mm (used for ball bearing 6305), also searched for: Shim | Shim | Centering washer | Bearing washer | Ball bearing washer | [...]

Front shock absorber -BGM PRO SC COMPETITION- for Vespa Largeframe Rally, Sprint, GT / GTR, TS, GL, Super, VNA, VNB, VBA, VBB Wideframe V30-33, VM, VN, VL, GS150 / GS3, VB, ACMA (1952-), Hoffmann Königin The BGM PRO SC Competition shock absorber is a further development of the successful BGM PRO F16 Sport series. The competition series differs optically through the [...]

bgm - Item number: BGM2780 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Motor> Motor housing> Studs Other customers who are interested in motor housing bolts - M7 x 80mm -BGM ORIGINAL- Vespa Largeframe (1984-), Vespa SmallframeV50, PV125, ET3, PK are also interested in: Engine housing bolts | Motor housing studs | [...]

Lambretta cylinder head gasket with 1,5 mm thickness and 65,0 mm diameter. Ideal to compensate for connecting rod lengths, compression heights, longer strokes or twisted cylinders. bgm - Item number: BGM0241 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacer cylinder head [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

Float needle BGM PRO Viton ® for Dell'Orto carburettor The float needle regulates the flow of petrol into the carburettor. If the float needle is defective, the carburetor overflows and the gasoline drips onto the floor and / or into the engine. The result is often a poorly starting and smoking engine. If the carburettor is revised, it is therefore useful [...]

bgm - Item number: BGM6606HSL Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Frames> Electronics> Blinker Other customers who are looking for cable adapter kit for parking light connection Moto Nostra LED headlights -BGM PRO- Vespa GTS125-300 (model years 2014-2018) are also interested in: indicators | Daytime running lights | LED | [...]

We have the BGM original turn signal switch rubber manufactured in excellent material and processing quality as a replacement for the original product no longer available from Piaggio. The rubber is mounted between the handlebar and the turn signal switch. It takes up the round shape of the handlebar and offers the switch a flat surface for mounting. To fasten the indicator switch, two screws M3x12mm [...]