bgm - Item number: BGM2586 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,11 kg Category: Engine> Carburettor> Spacer Other customers who are looking for intake manifold spacers -BGM PRO Malossi / Polini-Vespa PX80, PX125, PX150, PX200, Sprint, Rally180 (VSD1T), Rally200 (VSE1T) - 10mm are interested, also looked for: Intake manifold spacer | Spacer [...]

bgm - Item number: BGM8010RN46 Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor> Gearbox> Sprockets Other customers who are looking for rear sprockets -BGM PRO Superstrong- Lambretta LI, LI S, SX. TV (series 2-3), DL / GP - 46 teeth are interested, also looked for: pinion [...]

The BGM FASTER FLOW SI carburetor is based on a brand new SI26 / 26 E Dell'Orto / Spaco carburetor. With a diameter of 25mm, these already have significantly more area than a SI24 carburettor. In principle, this type of carburetor can be drilled out further, but then the guidance of the throttle valve and its sealing function are no longer 100% guaranteed. Therefore we restrict [...]

BGM PRO silicone sealing sets consist of a 0,5mm thick, high-quality sealing paper (like Piaggio "green" original). In addition, the seals, which are always in contact with oil, have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the [...]

bgm - Item number: BGM2200BS05 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are looking for Spacer cylinder base -BGM PRO RaceTour- Lambretta LI , LIS, SX 125-150, TV 175 (series 2-3), DL / GP 125-150 - 0.5mm are also interested in: Spacer [...]

BGM gear shoulder rings are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. The quality assurance guarantees a maximum deviation of only four hundredths of a millimeter undersize. This makes the BGM discs much more precise than Piaggio shoulder rings. WHY shoulder rings are used to compensate for the axial play between [...]

bgm - Item number: BGM6887S30 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Rubber parts> Carburettor connecting rubbers Other customers who are interested in connecting rubber with flange inlet system -BGM ORIGINAL Smart Flow- AW = Ø30mm, hole stitch = 60mm - PHBL25, TMX24 are interested, also looked for: connecting rubber | Flange | Carburetor [...]

When choosing crankshaft bearings, you should always pay attention to high quality. We have put together BGM ORIGINAL bearing sets for you. In addition to quality bearings, the kit also contains high-quality shaft seals. Each part of the bearing set is at least at the original manufacturer level. Shaft seals in this set are supplied exclusively by Corteco, ball bearings from renowned European [...]

Very high quality special nut, made in Germany, for all Vespa engines with the clutch on the crankshaft built before 1990, which originally have a so-called castle nut. So therefore suitable for all vehicles built from 1950 onwards, such as V1-V5, VNB, VNA, GS150, GS160, Sprint, Rally, GT, GTR, T5, Cosa1, PX, PE etc ... These in Germany [...]

Cylinder base gasket -BGM PRO- 0,8mm Malossi 139ccm & 166ccm (aluminum) bgm - item number: WS5160 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder base -BGM ORIGINAL Malossi 139/166 cc- Vespa PX80, PX125, PX150 - 0.8mm, [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]