Lambretta cylinder base gasket with a thickness of 2,0 mm for the small engine blocks with 125-193 ccm displacement. Ideal to compensate for connecting rod lengths, differences in the heights of the engine sealing surfaces, turned cylinders or to be able to experiment with the control times. The size of the overflow channels is dimensioned so that it corresponds to the standard overflows. Ideally, this should match the engine block and cylinder.

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

These are our BGM PRO Superstrong Lambretta front brake cables. They have a strong Ø2,5mm inner cable diameter and a firmly pressed cable holder on the outer shell. Both improve the braking process considerably. Innocenti made a similar modification in May 1966 with the last models of the DL series which were equipped with a disc brake. The cable thickness has also been increased. [...]

High quality new edition of the cable boxes for the classic Vespa PX. Here in a special version for the PX models not launched in Germany until 1984 WITHOUT a battery. The wiring harness of these vehicles already has a round connector on the ignition side, like the later PX Lusso models. Therefore this box is higher than that of the German [...]

bgm - Item number: 4550011 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Frame> Fork> Headsets Other customers who are interested in headset cup nose washer -BGM ORIGINAL- Vespa T5 125cc, Cosa, PK XL2 are also looking for: Headset cups | Nasal disc | Nasal disc | U | Disc | [...]

Lambretta bgm PRO MRB RaceTour piston kit with 70 mm diameter. Complete piston kit consisting of: piston, two steel piston rings each 1mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is primarily intended as a replacement piston for the bgm RaceTour cylinder, but can also be used as a conversion piston.

Piaggio specific plug with enclosed contact clamps. A defective cable harness can be repaired or cable branches or entire cable harnesses can be created yourself. Simply connect the cables to the plug contact (crimp or solder with the appropriate pliers) and then push them into the plug. The contact locks in automatically and is then permanently connected to the plug. Two contacts: [...]

Water pump -BGM PRO- Universal, 12V, delivery rate 8l / min. A must for sprinters. The external water pump. At over 14.000 rpm, the mechanical water pumps are too fragile and also cost valuable performance. Water pump BGM Pro, CNC manufactured, massive pump body and paddle wheel. Connection: 12V DC (direct current) Pump power 8l / min Hose connections: Ø15mm Current consumption: 0,15A Speed: 3200U / min Watt: 3,52W bgm - Item number: [...]

bgm - Item number: BGM1220MAPX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Seals> Seals Other customers who are interested in seals crankcase / fan wheel housing (10x) -BGM PRO silicone Lambretta LI. LIS, SX, TV (Series 2-3), DL / GP 125-200 are also interested in: Seal | Crankcase | [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

The bgm PRO Big Box Sport exhaust is based on the Big Box V4. We call it sport because it delivers more power across the entire range on all comparison engines. This makes the Big Box Sport the most powerful Big Box system that bgm has ever seen. The increase in performance was achieved with a redesign of the internal damper chamber.

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]