Gearbox from BGM Pro for Vespa largeframe engines. Available with or without a main shaft. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest loads. This extremely good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion permanently resistant to wear. This makes the BGM gear parts an uncompromising [...]

abcde X 01 2,48 1,20 26,00 X 02 2,50 1,80 24,00 X 03 2,46 1,60 22,00 X 04 2,48 1,80 20,00 X 05 2,46 1,80 24,00 X 06 2,50 1,20 26,00 X 07 2,50 1,80 20,00 X 08 2,50 1,40 26,00 X 09 2,50 1,40 18,00 X 10 2,50 1,40 20,00 [...]

When choosing crankshaft bearings, you should always pay attention to high quality. We have put together BGM ORIGINAL bearing sets for you. In addition to quality bearings, the kit also contains high-quality shaft seals. Each part of the bearing set is at least at the original manufacturer level. Shaft seals in this set are supplied exclusively by Corteco, ball bearings from renowned European [...]

MATERIAL The bgm PRO Touring crankshafts are forged. The material is denser, which means that it dissipates heat better and is therefore more resistant to distortion. In addition to the crank webs, the connecting rod is forged and then CNC machined. STORAGE The lower connecting rod bearing is lubricated via two large lubrication slots and a total of four additional pockets on the side. The SSC racing camp and [...]

The BGM PRO SC shock absorber series is one of the finest chassis components that you can treat your scooter to. CNC machined, high-strength aluminum (6061) which is finally equipped with an absolutely corrosion-resistant hard anodized coating, form the basis for the high-end chassis. The very stable piston rods are machined in an extremely complex manner in order to obtain perfect surfaces with ideal sliding properties. Thereby [...]

New version of the popular BGM ORIGINAL rims The bgm Original V2.0 rims are precisely manufactured and have an exact concentricity. High-quality stud bolts and nuts make them the perfect, higher-quality alternative to the Piaggio original rims. The bgm original rims have a subtle bgm logo and an embossed size indication. The rims can be used with [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

bgm - Item number: BGM0510 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,19 kg Category: Motor> Motor housing> Sockets Other customers who are interested in swing arm axis for motor swing arm parallelogram 15,8 x 215 mm -BGM ORIGINAL- Gilera Runner FX125, FXR180, Piaggio Skipper 125 2-stroke, SKR125 / 150, TPH125, ZIP125 4-stroke are interested, [...]

We carry indicator glasses from Piaggio, Siem, Triom as well as Bosatta and BGM. TRIOM / SIEM Both high-quality manufacturers who manufacture for Piaggio and therefore have an E-mark. The two manufacturers only differ slightly in terms of design and color. For perfect color consistency and fit, read off which manufacturer it is on the indicator body before buying. PIAGGIO Piaggio will [...]

We carry indicator glasses from Piaggio, Siem, Triom as well as Bosatta and BGM. TRIOM / SIEM Both high-quality manufacturers who manufacture for Piaggio and therefore have an E-mark. The two manufacturers only differ slightly in terms of design and color. For perfect color consistency and fit, read off which manufacturer it is on the indicator body before buying. PIAGGIO Piaggio will [...]

Indicator update for Vespa GTS models built before 2014! THE DESIRE The Vespa GTS models from 2014 already have an LED daytime running light which is integrated in the indicators. These indicators also fit in all previous years of the GT / GTS / GTL series. THE PROBLEM The wiring is not, however, due to the different plug types used at the factory.

bgm - Item number: BGM0292HS05 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacer Other customers who are interested in Spacer cylinder head -BGM ORIGINAL Ø52.5mm- Vespa PX125, Cosa125, GT125, GTR125, TS125, Super125 - 0.5mm are interested, also looked for: Spacer | Cylinder head | Distance seal [...]