Disc brake made in Germany with braking torque support (Antidive). This effectively prevents the annoying bottoming out when braking. This means that the large braking force of the disc brake can be used optimally. The Antidive also enables the assembly of softer fork springs, as these no longer have to absorb a bottoming out due to the high braking torque. This improves driving behavior and comfort [...]

BGM Pro SC COMPETITION shock absorber - sporty - comfortable - adjustable - with TÜV - HARMONIOUS The BGM Pro SC COMPETITION suspension impresses with its harmonious basic set-up. Intended for sporty driving on the road, the predefined specific damper setting and spring rate is an optimal balance of sportiness and suitability for everyday use. The damper can be adjusted 12-fold in the rebound damping. Thus, with a simple [...]

Ingenious little cable branch that enables the retrofitting of a brake light function on vehicles with disc brakes, even before the year of construction 1998. To do this, screw in a brake light switch on the brake pump (if not already present). The cable branch is suitably pre-assembled to be connected directly (incl. Rubber seal). Lead the cables through the steering head and the inside of the frame to the brake pedal and there in parallel to [...]

bgm - Item number: BGM7982 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,80 kg Category: Frames> Wheels> Rims Other customers who are interested in rims -BGM PRO, tubeless, 2.10 -10 inch aluminum- Lambretta LI series 1-3, LI S, SX, TV series 2-3 - black matt are interested, searched [...]

bgm - Item number: BGM3425 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frame> Fork> Nuts Other customers who are interested in castle nut swing arm / front wheel bearing- BGM Original -VESPA - V50, V90, SS50, SS90, PV125, ET3 are also interested in: Circlip | Front wheel bearings | Circlip | Clip | [...]

Bgm Pro harness, better than original. Every cable harness is professionally manufactured and has solidly pressed (crimped) cable lugs. Where appropriate, they are also provided with protective shrink tubing. Loose wire ends are tinned, with the exception of the cable branch that leads to the light switch with screw clamps. For the greatest possible freedom of assembly, the cables are a little longer than required. Here [...]

bgm - Item number: BGM4590KTRD Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,24 kg Category: Frame> Brakes> Frame parts Other customers who are looking for cover brake pump set -BGM PRO, without Mirror holes- Vespa GTL125 / 200 (ZAPM311, ZAPM312), GTS125 (ZAPM313), GTS250 (ZAPM451), GTS300 (ZAPM452), GTS ie Super125 (ZAPM453), GTS ie Super300 [...]

bgm PRO wiring harness for all Lambrettas with electronic ignition. The wiring harness is made with as few cables as possible, so it corresponds to the ideal of minimal electronics. The wiring goes to CDI, voltage regulator, headlight connector in the steering head, brake light switch and taillight. There are no annoying clipboards. A piece of bougier tube for the cable branch of the ignition base plate is included in the scope of delivery. The wiring harness [...]

Float needle BGM PRO Viton ® for Dell'Orto carburettor The float needle regulates the flow of petrol into the carburettor. If the float needle is defective, the carburetor overflows and the gasoline drips onto the floor and / or into the engine. The result is often a poorly starting and smoking engine. If the carburettor is revised, it is therefore useful [...]

bgm - Item number: BGM7929TL Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Clutch> Tools Other customers who are interested in castellated wrenches clutch nut -BGM ORIGINAL- Vespa Largeframe ( up to 1995), also searched for: Crown nut wrench | Coupling nut | Crown nut wrench | Clutch tool | Wrench | [...]

Idle jet set -BGM PRO Dellorto 4mm- (30-52) - (30-32-35-38-40-42-45-48-50-52) bgm - item number: 7671256 Availability: in stock (Please check availability here in Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Carburetor> Carburettor nozzles Other customers who wanted auxiliary jet set -BGM PRO for Dellorto (type: 11600) 4mm- (30-52) (30-32- 35-38-40-42-45-48-50-52), also looked for: auxiliary jet set [...]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. As in the original, the clamping screws for the shift cables have an internal plate. This protects the inner cable of the Bowden cable and helps to [...]