Complete electronic ignition for Piaggio Ciao and SI The advantages at a glance: stable ignition point even at high speeds, strong ignition sparks, high luminous flux, pole wheel weight: approx. NOTE: A corresponding motor housing is required for the assembly of the ignition: Polini Speed ​​Engine (P1300) Malossi racing housing (M1700210 or M576352) bgm - item number: BGM5717514CI Availability: out of stock (Please check [...]

With this ball bearing and needle bearing pull-out set, the screwdriver has all the options for careful bearing dismantling! The set contains the optimally suitable extractor for most bearing inner diameters. The respective extraction expanding mandrel is inserted into the bearing to be dismantled, tightened with the supplied expansion screw and then the area around the bearing is evenly opened with an open flame or hot

Washer on crankshaft under clutch from bgm Pro The washer between crankshaft and clutch has three very important tasks to fulfill: Establishing the controlled preload between crankshaft and ball bearing Providing a plain bearing surface for the clutch pinion during operation of the clutch The correct distance between the clutch and the Manufacture bearings so that the gearing with [...]

The bgm PRO Racing shaft with 51 mm stroke is perfect for class 1 of the ESC and people who need a stable shaft for ambitious road tuning. The proven crank webs of the 54 mm shaft are used here. The larger cheek diameter was retained here to provide the necessary, higher overlap on the crank pin and thus additional [...]

Installation information: The coupling tiller and base plate can only be installed in one position. To do this, orient the spider to the base plate in such a way that both the lower and upper spring pouches of both components are aligned. This prevents the clutch springs from being misaligned, thereby ensuring that the clutch functions properly (see also PDF under "downloads"). As a lubricant, we recommend [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Brake pads BGM PRO Sintersport - massive stopping power The BGM PRO sintered brake pads are a new generation of pads. It is all-metal brake pads that are manufactured in a complex sintering process. With these pads, braking performances are achieved that meet the highest demands. QUALITY The BGM Pro brake pads are manufactured exclusively for BGM by one of the most renowned Italian brake pad manufacturers. [...]

High-precision BGM PRO auxiliary shaft axis for the bearing of the primary drive of the Vespa PX125-200 models. Here in a complete set including bearings, bearing needles and circlips. This means that a secondary shaft can be completely re-stored. We recommend the BGM locking set (BGM6503NKT) to secure the auxiliary shaft axis. For a comprehensive overhaul, we offer the primary repair kit from BGM (BGM0195F48). This contains reinforced [...]

BGM ORIGINAL countersunk screw for fastening the carburetor pan on the engine. Suitable for all Vespa largeframe engines with rotary valve control up to 1984. The screw used by Vespa to attach the carburetor pan on the engine does not correspond to any common DIN standard. Conventional DIN screws have a countersunk head that is too large, which means that the screw protrudes over the sealing surface. The BGM [...]

bgm - Item number: BGM9011 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,30 kg Category: Frame> Brakes> Brake cams Other customers who are interested in brake cams front -BGM ORIGINAL- Vespa PX ( Bj. 1984-1998), T5 125ccm, PK50 HP (V5N2T), PK50 (V5X1T), PK50 S (V5X2T), PK80 S (V8X5T), PK125 S [...]

bgm - Item number: BGM6478TX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,15 kg Category: Workshop supplies> Trains Other customers who are interested in end cap for outer cable -BGM ORIGINAL- Ø inside = 8mm - 10pcs. interested, also searched for: end cap | Outer cable | End cap | Pull sleeve | Pull cap | Sleeve | Grommet [...]

bgm - Item number: BGM8010NA Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Engine> Clutch> Clutch cover plates Other customers who are interested in clutch cover plate -BGM PRO Superstrong- Lambretta LI, LI S, SX. TV (series 2-3), DL / GP interested, also searched for: clutch cover plate | Cover disk | Cover plate | [...]