Set di fissaggio per il cavo contachilometri -BGM ORIGINAL- contachilometri italiani Lambretta DL, GP bgm - Item number: BGM6401SN Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frame> Fork > Speedometer cables Other customers who are interested in fastening set for speedometer cables -BGM ORIGINAL- Italian speedometers Lambretta DL, [...]

Cylinder base gasket -BGM PRO- 1,5mm Malossi 210ccm bgm - item number: 3820027 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Engine> Cylinder> Spacer Other customers who are Interested in spacer cylinder base -BGM ORIGINAL Malossi 210 ccm- Vespa PX200, Rally200 - 1.5mm, also looked for: Spacer [...]

Seat cover for the standard Lambretta seat frames. The cover is covered with Alfatex on the side and top of the middle part. The bench, which was handcrafted for us in Italy, is lined with foam. This guarantees a high level of comfort even on long journeys. One of the two two-cylinder prototypes from Innocenti is equipped with a bench like this one [...]

bgm - Item number: BGM0902EX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust> Springs Other customers who are interested in exhaust springs -BGM ORIGINAL- stainless steel (10 pieces ) - 60mm, also searched for: exhaust spring | Spring | Exhaust bracket | Exhaust retaining spring | Manifold spring | Retainer [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

Brake pads BGM PRO Sintersport - massive stopping power The BGM PRO sintered brake pads are a new generation of pads. It is all-metal brake pads that are manufactured in a complex sintering process. With these pads, braking performances are achieved that meet the highest demands. QUALITY The BGM Pro brake pads are manufactured exclusively for BGM by one of the most renowned Italian brake pad manufacturers. [...]

BGM gear shoulder rings are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. The quality assurance guarantees a maximum deviation of only four hundredths of a millimeter undersize. This makes the BGM discs much more precise than Piaggio shoulder rings. WHY shoulder rings are used to compensate for the axial play between [...]

Side shaft BGM PRO for Vespa Largeframe PX, Rally, T5, Cosa, LML (2-stroke) Maximum stability with the best performance thanks to ideal gradations Modern cylinders such as Malossi MHR, Quattrini M244 or Pinasco 251 have the power and torque level of the Vespa largeframe motors at one Raised a completely new level. The transmission components used must be correspondingly stable. MATERIAL QUALITY The BGM PRO [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM7811LEV Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frames> Brakes> Brake-clutch levers Other customers who are interested in brake levers (radial pump) -BGM PRO Radial black interested, also looked for: brake pump | Radial | Pump | Hand brake pump | Brake fitting | Brake fitting | Brake [...]

The BGM stainless steel rim is manufactured in Germany with high precision by a renowned and, of course, certified company. The result is a rim that even Enrico Piaggio couldn't have made better. The high-strength rim is characterized by perfect concentricity, absolute freedom from rust and a reinforced rim flange. The rim is screwed into stainless steel with the special nuts provided. Their [...]

bgm - Item number: 3333148 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,15 kg Category: Motor> Motor housing> Spacer Other customers who are interested in spacer fan wheel cover -BGM PRO- V50 1. Series (V5A1T1001 -92876, V5SA1T1001 -15325) - 3.00mm are interested, also looked for: Fan wheel cover | Flywheel cover | Cooling wheel cover | [...]