bgm - Item number: 3332368 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Workshop requirements> Electronics Other customers who are interested in cable lug - flat receptacle 90 ° angle 6,3mm Ø = 0,75-1,5mm²- 10pcs. interested, also searched for: cable lug | Electrics | Connection | Cable | Cable connector | Flat plug | Ring eyelet | [...]

bgm - Item number: BGM7982 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,80 kg Category: Frames> Wheels> Rims Other customers who are interested in rims -BGM PRO, tubeless, 2.10 -10 inch aluminum- Lambretta LI series 1-3, LI S, SX, TV series 2-3 - black matt are interested, searched [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

Ignition coil -BGM PRO- Minarelli 50ccm (Yamaha ignition) bgm PRO Racing ignition coil with high-end secondary winding. With this coil, the secondary voltage is almost doubled. The standard ignition voltage of the original ignition coil is around 16.000V. With the race high tension coil ignition coil from BGM PRO we achieved an ignition voltage of a full 31.000V !!! The advantage lies in the better [...]

BGM chain sprockets are developed for the enormous powers and torques of today's engines. Made from high-alloy SCM415 / 15 CrMo 5 steel. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) provides a reassuringly secure basis for the production of BGM pinions. The production meets the high standard for transmission production by Honda. Each [...]

bgm PRO fan wheel completely developed and manufactured in Germany. This is a one-piece fan wheel without rivets or screws. Technology of the 21st century with an almost original look and design. The fan wheel has been successfully tested up to 24.000 rpm and gives the highest alternator performance with the bgm V3 ignition base plate. Features: Moment of inertia 6240 kg mm² (-5%) [...]

bgm - Item number: BGM6412TC Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,12 kg Category: Frames> Cables> Cables Other customers who are interested in throttle cable -BGM ORIGINAL- Vespa PX (- 1984) - interested in black, also looked for: throttle cable | Throttle cable | Throttle rope | Throttle | Control | Cable [...]

bgm - Item number: BGM8010NR47 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,00 kg Category: Motor> Gearbox> Sprockets Other customers who are looking for rear sprockets -BGM PRO Superstrong- Lambretta LI , LI S, SX. TV (series 2-3), DL / GP - 47 teeth are of interest, also looked for: pinion | [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Washer on crankshaft under clutch from bgm Pro The washer between crankshaft and clutch has three very important tasks to fulfill: Establishing the controlled preload between crankshaft and ball bearing Providing a plain bearing surface for the clutch pinion during operation of the clutch The correct distance between the clutch and the Manufacture bearings so that the gearing with [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

We have the BGM original turn signal switch rubber manufactured in excellent material and processing quality as a replacement for the original product no longer available from Piaggio. The rubber is mounted between the handlebar and the turn signal switch. It takes up the round shape of the handlebar and offers the switch a flat surface for mounting. To fasten the indicator switch, two screws M3x12mm [...]