bgm - Item number: BGM7908TL Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 1,00 kg Category: Motor> Tools> Tools Other customers who are interested in punch assembly tool for installation of ball bearing auxiliary shaft 6302 -BGM PRO- Vespa PX200, Rally180, Rally200, COSA200, T5 125cc, GS150 / GS3, Hoffmann, T1, T2, T3, GL [...]

BGM clamping plate sets as well as their individual parts are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. The high material quality enables reliable clamping of the brake cable. Also available as practical workshop sets (10 pieces) bgm - item number: BGM6482BX Availability: in stock [...]

The bgm PRO Racing shaft with 51 mm stroke is perfect for class 1 of the ESC and people who need a stable shaft for ambitious road tuning. The proven crank webs of the 54 mm shaft are used here. The larger cheek diameter was retained here to provide the necessary, higher overlap on the crank pin and thus additional [...]

BGM PRO brake shoes with lining material 'MADE IN GERMANY' QUALITY The BGM Pro brake shoes are manufactured exclusively for BGM by one of the most renowned Italian brake lining manufacturers. The covering material comes from the German manufacturer Beral. The aluminum base is cast in the original shape, so a perfect fit is always guaranteed. MATERIAL + PERFORMANCE The pad mixture for the [...]

bgm - Item number: BGM1770R635 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinders> Piston rings Other customers who are interested in piston rings -BGM PRO- Vespa PX125, PX150 , Sprint Veloce - suitable for conversion piston for Polini 177 (cast iron) and DR177 ccm cylinder - 63,5 × 1.0mm (1st oversize) [...]

The bgm Pro coupling socket is another innovation in the field of Vespa coupling technology. A high-quality, special material always ensures optimal sliding behavior. The socket allows the clutch to be separated very cleanly, and the start-up behavior is optimized. The result is a clean coupling without judder, even with very powerful engines. The socket is made by bgm [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

Complete BGM PRO rear brake cable with a strong Ø3mm inner cable diameter (Innocenti factory specification) and pressed cable holder on the outer shell. PROBLEM Ex works, the original cable often has play in the abutment, which means that it is not exactly at an angle to the cable stop. It is only pulled into position by the increased tensile stress during the braking process. This eats up a good part of the braking performance [...]

BGM small parts for the brake cable fastening are manufactured by a supplier for the Japanese motorcycle industry in an excellent quality. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. The high quality of the material enables reliable fastening of the brake cable. Also available as practical workshop sets (10 pieces) bgm - item number: BGM6485X Availability: in stock [...]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]

bgm - Item number: BGM0190B7 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Gearbox> Primary repair Other customers who are looking for cover plate primary -BGM PRO Ø70mm- Vespa PK50 XL2, PK125 XL2, also looked for: cover plate | Primary | Disc | Cover plate | Cover disk [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]