bgm - Item number: BGM778BT Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Frame> Shock absorbers> Shock absorbers Other customers who are interested in screw set rear shock absorber -BGM PRO- M9 x 70mm (with shoulder for hole Ø10mm), AF14, galvanized, incl. Nut - used for BGM PRO SC shock absorber / motor [...]

bgm - Item number: BGM6564C Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 1,97 kg Category: Engine> Gearbox> Gearbox Other customers who wanted ancillary shaft set -BGM PRO- Vespa PX200, Rally200 - 12-13-17-21 teeth with primary gear BGM 64 teeth and primary repair kit reinforced BGM PRO are interested, also looked [...]

The bgm PRO Superstrong is the plug n play coupling solution for small frames - Made in Germany. Here in a special version for auxiliary shafts from the Italian manufacturer DRT Racing. Its auxiliary shafts move the clutch 1,5mm further towards the clutch cover. In order to avoid distancing, we offer a coupling that compensates for exactly this 1,5mm. [...]

Assembly set for reinforced chain tensioners. This set consists of a washer plate that successfully prevents the chain tensioner from bending open. In addition, M 6 studs are included in the scope of delivery, which, in contrast to the screws usually used, considerably protect the thread. The set is rounded off by locking nuts, which make the locking plate superfluous. Security fanatics who wear belts and suspenders [...]

Spacer for the cylinder base. This allows a cylinder to be raised by the specified amount. Intended to compensate for a longer connecting rod, e.g. by installing a modified PX200 crankshaft in a PX125 housing. The 5mm longer connecting rod of the PX200 (110mm) can be perfectly balanced by the spacer. Without cut-outs for the overcurrent ducts to ensure maximum freedom when reworking [...]

BGM Pro gear parts are ultra-solid material. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest demands. The very good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. Better than Piaggio Ware. Always consistently high quality. No compromise. BETTER Usable for all [...]

bgm - Item number: BGM2581 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,19 kg Category: Engine> Carburetor> Intake manifold Other customers who are interested in intake manifold for BGM1550 -BGM PRO Ø24mm for Dellorto PHBL24 / 25, Polini CP23 / 24- Vespa Wideframe 125ccm Vespa V1 to V15, V30 to V33, VN, VM, [...]

Lambretta cylinder head gasket with 1,0 mm thickness and 65,0 mm diameter. Ideal to compensate for connecting rod lengths, compression heights, longer strokes or twisted cylinders. bgm - Item number: BGM0240 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacer cylinder head [...]

Enables the scooter to be parked quickly and conveniently in the garage, carport, shed, etc. Also ideal for use on a lifting platform, while the two-wheeler is being transported on the loading area of ​​a van or trailer. Reliably fixes the vehicle on the front wheel in a vertical position. To do this, simply drive the front wheel into the seesaw, it folds with [...]

bgm - Item number: R14403 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,08 kg Category: Frame> Tank> Fuel taps Other customers who are interested in fuel tap -BGM ORIGINAL- CPI Oliver, Hussar , Popcorn, Formula, Bingo, GENERIC XOR, Cracker, Toxic, Pandora, Sirion, XOR2, KEEWAY Ry8, Fact50 (Focus), ATU (Explorer) Spin, [...]

bgm - Item number: 1079157A Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Frame> Fork> Speedometer drives Other customers who are interested in speedometer worm -BGM ORIGINAL- Vespa 9 teeth, l = 31mm, 2,7mm square, black (used in Vespa V50, 50N, 50L, 50R (V5A1T, 9 inch tires) are of interest, [...]

Front brake drum 8 "incl. Brake shoes -BGM PRO cast iron- Vespa Wideframe V1-15, V30-33, VU, VM, VN, VL, VB, VBA, VBB, VNA, VNB, ACMA, Hoffmann front brake drum" Made in Germany " by Strohspeed for BGM PRO. Suitable for all Vespa models with 8 inch tires (not Vespa Super VNC / VBC). Made of high quality cast iron, it offers enormous advantages over [...]