bgm PRO suction hose with increased volume in front of the carburetor compared to the original suction hose. The intake hose is available with four different connection sizes on the carburetor: 40 mm (e.g. Dellorto PHBL 25), 42mm (Dellorto PHBH 28-30), 45 mm (Mikuni TM24 and Jetex SH22) or 50 mm (Keihin PWK 28, Polini 28 - 30). The connection width on the air filter is [...]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

bgm - Item number: 7672964 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,29 kg Category: Frames> Trains> Cable pulls Other customers who are interested in train universal -Ø = 1,6mm x 2300mm, sleeve = 2000mm, nipple Ø = 5,5mm x 7mm - used as a shift cable - twisted PTFE - black are interested, also looked for: [...]

The quality of the bgm ORIGINAL CDIs is at the OEM level. In addition, they are open CDIs. This means that no speed limiter is integrated in the CDI. This allows your engine to rev up to the max. The bgm ORIGINAL CDIs are subject to very strict quality controls. This ensures that: a constant and strong ignition spark over the entire engine speed range [...]

bgm - Item number: BGM4511 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frames> Brakes> Brake-clutch levers Other customers who wanted brake lever set -BGM PRO CNC Sport, long (165mm) - Vespa LX, LXV, S, Primavera 50-150, Sprint50-150 - chrome are interested, also looked for: brake levers | Brake handle [...]

Special tool - Made in Germany Dismantling tool for bearing type NBI253815. Suitable vehicles: Vespa PX, Cosa, Sprint Veloce. PK ETS Is used to remove the needle bearing cage of the crankshaft bearing from the small engine housing. To do this, dismantle the small motor half, remove the shaft seal and insert the tool from the shaft seal side. Heat the motor housing and remove the bearing with light blows.

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

Tapered roller bearings have a larger contact surface and are therefore significantly more resilient than conventional factory solutions with ball bearings. Tapered roller bearings can cope with the high loads of powerful braking systems much better and are also much more wear-resistant. They increase active driving safety by ensuring the ideal state of smooth, non-locking steering for a very long time. A criterion that [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

Perfectly coordinated carburetor kit. The scope of delivery includes the bgm PRO 17 carburetor, the bgm PRO intake manifold and all the small parts required for assembly. The bgm PRO carburetor is super easy to tune. The PHBN series is widespread and so all tuning parts are readily available. The open BGM PRO intake manifold is perfectly matched to the carburetor. CONCLUSION: [...]

bgm - Item number: BGM6413ST Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Frames> Cables> Cables Other customers who are interested in choke cables -BGM ORIGINAL- Vespa PX Lusso ( from 1984) - interested in black, also looked for: Choke cable | Cold start train | Cold start | Choke cable | [...]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]