bgm - Item number: BGM78ADJ Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Frames> Shock absorbers> Shock absorbers Other customers who are interested in adjusting dial damping Soft / Hard -BGM PRO- Series for shock absorbers of the series BGM PRO R12, BGM PRO SC / R12, BGM PRO SC / F16 [...]

Retaining clip BGM ORIGINAL for fuse holder VESPA PX old (-1984) Nice reproduction part made of PTE - Made in Germany- to fix the fuse holder to your frame. You need an M6 X 12 (7800045) screw bgm - item number: BGM4730 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: [...]

BGM PRO silent rubbers made of polyurethane. Significantly tighter than the original rubbers, they reduce natural movement to a minimum. The damping works in a defined and precise manner. This makes the vehicle appear much tighter and the dampers respond more quickly. The set contains the two rubbers for the shock absorber on the front axle. The rubbers sit on the shock absorber and are each [...]

Very nice and heavy quality. Replaces countless special tools that only fit on one model at a time. bgm - Item number: BGM8800 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,71 kg Category: Motor> Clutch> Tools Other customers who are interested in clutch holder / flywheel holder -BGM ORIGINAL Ø = 90 -125mm- all automatic scooters are interested, looked [...]

Cable branch BGM PRO for mounting the voltage regulator directly on the engine block - conversion to electronic ignition Vespa Smallframe / Largeframe WHY BGM6690V50 With this cable branch the voltage regulator can be positioned more freely, regardless of the connection to the conversion wiring harness (item no .: 9077011). Vespa Smallframe With the Vespa smallframe models (V50, 50N, Special, PV etc.) it is ideally connected directly with [...]

Carburetor revision sets from BGM PRO contain high-quality spare parts to restore an existing carburetor to its factory condition. In addition to the seals, the set also contains the very important float needle. This ensures that the carburetor does not overflow and the engine has a stable idle. TIP: For a perfectly sealing surface, the float needle seat (usually made of brass [...]

The proven BGM Superstrong clutch is now also available for the Vespa GS150 / GS160 and SS180 models. The coupling is delivered ready for installation. It replaces the serial coupling of the GS / SS models 1: 1 and can usually * be used without further modifications. The clutch is available with 22 teeth (like the original) or with 23 teeth (longer reduction). Helical teeth [...]

Cylinder base gasket -BGM PRO- 0,8mm Malossi 139ccm & 166ccm (aluminum) bgm - item number: WS5160 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder base -BGM ORIGINAL Malossi 139/166 cc- Vespa PX80, PX125, PX150 - 0.8mm, [...]

High-precision BGM PRO auxiliary shaft axis for the bearing of the primary drive of the Vespa PX125-200 models. Made from extremely resilient and tempered 42CroMo4V steel. Qualitatively not comparable with cheaper replicas. This means that the primary drive can be repaired with 100% factory specifications. Mandatory equipment for tuned engines. INFO: The auxiliary shaft axle has a bearing surface on which the needles of the alternator-side [...]

Single flange plate of the BGM exhaust adapter for Vespa T5 engines. Single spare part. The outlet flange pipe is still required for completion. (US) bgm - Item number: 3330594 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,66 kg Category: Engine> Exhaust> Exhaust manifold Other customers who are interested in exhaust flange plate (for connecting pieces) - BGM Vespa [...]

BGM adjusting screws are manufactured in an excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. As in the original, the adjusting screws have an extra high lock nut. Also available as practical workshop sets (10 pieces) bgm - item number: BGM6495S30 Availability: in stock (Please [...]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]