Washer on crankshaft under clutch from bgm Pro The washer between crankshaft and clutch has three very important tasks to fulfill: Establishing the controlled preload between crankshaft and ball bearing Providing a plain bearing surface for the clutch pinion during operation of the clutch The correct distance between the clutch and the Manufacture bearings so that the gearing with [...]

Plastic storage dummy. This allows the crankshaft to be mounted and moved in the engine housing on a trial basis and without any effort. Thus, for pure measurement purposes, neither the crankshaft nor new bearings are stressed. Ideal to control the control angle of the crankshaft (rotary valve inlet) or the cylinder (exhaust angle, overcurrent angle). Made in Germany (US) bgm - Item number: BGM1203TL Availability: in stock (Please check the [...]

Lambretta bgm PRO MRB RaceTour membrane piston kit with 70 mm diameter. Complete piston kit consisting of: piston, two steel piston rings each 1mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is the perfect choice if you have converted your RT 225 cylinder to diaphragm control and want a durable and [...]

Nice PX Kickstarter in high quality and clean finish. Aluminum bgm - Item number: 5050019 Availability: In stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,29 kg Category: Motor> Gearbox> Kickstarter Other customers who are interested in Kickstarter-BGM ORIGINAL- Vespa PX, Cosa - aluminum interested, also looked for: Kickstarter | [...]

Gearbox from BGM Pro for Vespa largeframe engines. Available with or without a main shaft. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest loads. This extremely good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion permanently resistant to wear. This makes the BGM gear parts an uncompromising [...]

The bgm PRO Superstrong clutch linings in the "Racing Red" version are among the best-performing linings on the market. The heavy-duty organic pad mixture is created for the high pressures and high temperatures in racing. The high-quality covering material is thinner than a conventional cork covering. This enables the installation of an additional friction disc in the entire Racing Red pad package. Semi-organic covering material [...]

Auxiliary jet set -BGM PRO Dellorto PHBG- MA- (30-50) bgm - item number: 7671257 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Carburetor> Carburetor- Nozzles Other customers who were interested in auxiliary nozzle set -BGM PRO for Dellorto (type: 1488) PHBG- MA- (30-50) also looked for: auxiliary nozzle set | [...]

This practical dosing bottle fulfills two tasks: on the one hand, it serves as a storage container for quantities of up to 250 ml and at the same time, small quantities can be dosed very easily and quickly. The upper dosing chamber is filled simply by pressing the lower bottle body and has two graduation marks in 5 ml increments up to 10 ml.

Carburetor kits specially put together for the RaceTour Lambretta cylinders. The carburetor kits are based on the Polini carburettors and our bgm PRO intake manifold. The nozzle comes with an MB rubber rubber and offers the maximum possible distance between the carburetor and the side panel. The carburetor sits as well as in the original position and is also straight. The original or [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

bgm - Item number: 7676603 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Motor> Rubber parts> Bushings Other customers who are interested in bushing silent rubber shock absorber / motor -BGM ORIGINAL ( Made in Germany) Ø = 9mm x 44mm- Vespa VNA, VNB, VBA, VBB are interested, also looked for: Bush | Silent rubber [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]