Cylinder base gasket -BGM PRO- 1,5mm Malossi 210ccm bgm - item number: 3820027 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Engine> Cylinder> Spacer Other customers who are Interested in spacer cylinder base -BGM ORIGINAL Malossi 210 ccm- Vespa PX200, Rally200 - 1.5mm, also looked for: Spacer [...]

Please note: Piaggio 50-80ccm automatic vehicles (not PK automatic) generally use PHVA carburettors. The Hyper2 motors (from around 2001) use their own float chamber. This has a drain with hose and a drain plug. These carburettors require the float chamber with item number 1484704. NOTE: If it drips out of the hose, it is not the screw that is leaking, but the [...]

Carburetor -PHBN 17,5- Minarelli 50ccm - manual choke. The PHB carburettors are a constant in the scooter sector. They are characterized by easy assembly and good tunability. If a DellOrto PHB carburettor is already installed on the vehicle, changing to a larger one of the same type is possible without any problems. The PHB 17,5 mm [...]

Cylinder base spacer for the Malossi cylinder Sport and MHR with 210ccm. This can be used to support the cylinder in order to increase the steering angle that is important for performance. The MHR cylinder in particular has turned out to be a very grateful candidate for a lift, despite its much larger flushing cross-sections than its predecessor. A prerequisite is an environment that corresponds to the cylinder, such as [...]

bgm - Item number: BGM0292HS08 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacer Other customers who are interested in Spacer cylinder head -BGM ORIGINAL Ø52.5mm- Vespa PX125, Cosa125, GT125, GTR125, TS125, Super125 - 0.8mm are interested, also looked for: Spacer | Cylinder head | Distance seal [...]

Complete kit to re-store the crank mechanism. Absolutely recommended as a replacement measure or when installing a new crankshaft. The kit contains: 6305 FAG bearings for the drive side NU2205 bearings for the generator side * Drive-side Viton shaft seal from MB Developments Inner Viton shaft seal from MB Developments for the Maghousing Outer Maghousing shaft seal 6305 Seal Four Allen screws for [...]

BGM gear shoulder rings are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. The quality assurance guarantees a maximum deviation of only four hundredths of a millimeter undersize. This makes the BGM discs much more precise than Piaggio shoulder rings. WHY shoulder rings are used to compensate for the axial play between [...]

Seat cover for the standard Lambretta seat frames. The cover is covered with Alfatex on the side and top of the middle part. The bench, which was handcrafted for us in Italy, is lined with foam. This guarantees a high level of comfort even on long journeys. One of the two two-cylinder prototypes from Innocenti is equipped with a bench like this one [...]

Cylinder base gasket -BGM PRO- 0,8mm Malossi 139ccm & 166ccm (aluminum) bgm - item number: WS5160 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder base -BGM ORIGINAL Malossi 139/166 cc- Vespa PX80, PX125, PX150 - 0.8mm, [...]

BGM PRO Superstrong 2.0 CR - the original, now with Ultralube Extremely resilient coupling, very easy to use - Made in Germany The Superstrong 2.0 CR coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and a [...]

bgm - Item number: SC4011 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Frame> Rubber parts> Seals Other customers who are interested in sealing fuel tap inside -BGM ORIGINAL 26x4mm- Vespa Wideframe VN, VM, ACMA cork are also interested in: Seal | Tank | Frame | Sight glass [...]

bgm - Item number: BGM21090WLAC Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Ignition> Wiring harnesses Other customers who are interested in wiring base plate -BGM ORIGINAL HP V3.0 AC- Lambretta DL, GP - electronic ignition are interested, also looked for: ignition | Alternator | Lima | [...]