Tuning kit to convert PX125 / 150 (and similar) engines to 177ccm. The set includes: cylinder kit BGM Pro 177 exhaust BGM Pro touring carburetor SI24 BGM Pro main jet set It is intended to obtain the best possible combination of power, torque and service life based on the series engine. The set can be used without further adjustment work (no milling, turning or grinding necessary).

Fantastic rear light for your Speedfight 2. Great LEDs in honeycomb optics. The E marking only applies to the rear light. As soon as the indicators are connected, the E marking no longer applies. For problem-free operation of the indicators, please order our electronic flasher relay BGM6203 at the same time. CONNECTION ASSIGNMENT: black = ground blue = turn signal right yellow = rear light red = [...]

The connecting rubbers from BGM from the carburettor to the intake manifold with the connection size Ø = 35 / 35mm are made of a very oil and petrol tolerant material, which ensures maximum reliability and durability. Carburetor and intake manifold should be thoroughly degreased before assembly. We recommend the 12mm ABA SAFE hose clamps, these should not be over tightened. Suitable for: - [...]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]

Reinforced locking ring from BGM Pro with increased material thickness and greater pre-tensioning force. This has holes so that it can be easily used with circlip pliers. The BGM Pro retaining rings are an ideal addition to all clutch baskets, especially if they are equipped with strong springs. All BGM Superstrong couplings from 2017 contain this ring type in series. bgm [...]

bgm - Item number: 3330284 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Gaskets> Gaskets Other customers who are looking for gasket cylinder head -POLINI 133 ccm Evolution- Vespa PV125, ET3 125, PK125 - 0,5mm are interested, also looked for: Seal | Cylinder head | Head gasket | Cylinder head gasket [...]

The BGM PRO ball squeezer - Vespa Smallframe claw assembly made easy The BGM PRO ball squeezer is a cleverly designed tool. With it, the switching balls including the spring can be installed very easily and conveniently in the main shaft of the Vespa smallframe engines. Simple dismantling / assembly of the switching balls Switching balls are held securely in place. The main shaft is removed from the tool.

bgm - Item number: BGM6010S19 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Gearbox> Shims Other customers who are looking for gear shims -BGM ORIGINAL- Lambretta Series 1-3 - 1,90mm are interested, also looked for: Gear shim | Thrust washer | Washer gear | Gear disc | Spacer [...]

bgm - Item number: BGM0233S1010 Availability: out of stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are looking for spacers cylinder base -BGM ORIGINAL for Polini Evolution 133ccm, Parmakit SP09 130ccm, 135ccm, Parmakit Evo (-C) 135ccm- Vespa V50, PV125, ET3, PK50, PK80, PK125 [...]

We are now offering you high-quality cable lugs in bare brass for crimping and / or soldering. The bare brass is very easy to solder and corresponds to the appearance of the original wiring harness. In connection with our suitable cables, bougie tubes and shrink tubing sets, a defective cable harness can be repaired or, if necessary, even completely new. The cable lugs are [...]

Complete BGM PRO rear brake cable with a strong Ø3mm inner cable diameter (factory specification Innocenti last GP / DL models). BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or [...]

Plastic storage dummy. This allows the crankshaft to be mounted and moved in the engine housing on a trial basis and without any effort. Thus neither the crankshaft nor new bearings are stressed for pure measurement purposes. Ideal to control the control angle of the crankshaft (rotary valve inlet) or the cylinder (exhaust angle, overcurrent angle). Made in Germany (US) bgm - Item number: BGM1207TL Availability: out of stock (Please check [...]