Lambretta cylinder head gasket with a thickness of 2,5 mm and a diameter of 65,0 mm. Ideal to compensate for connecting rod lengths, compression heights, longer strokes or twisted cylinders. bgm - Item number: BGM0243 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacers [...]

bgm - Item number: BGM0291HS10 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacer Other customers who are interested in Spacer cylinder head -BGM ORIGINAL Ø46mm- Vespa P80X , PX80, PX80E - 1.0mm, also searched for: Spacer | Cylinder head | Distance seal | Distance | [...]

Compact voltage regulator for all alternators with 12 volts. The controller supplies alternating current and optionally also direct current. Thus, it is not only the perfect and reliable replacement for all conventional voltage regulators, it also enables a modern expansion of the existing on-board network. AC - AC alternating current: Input and output for the unregulated alternating current of the ignition base plate and the regulated current [...]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. As in the original, the clamping screws for the shift cables have an internal plate. This protects the inner cable of the Bowden cable and helps to [...]

bgm - Item number: BGM8311 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Engine> Clutch> Clutches Other customers who are looking for seals for spacer clutch cover -BGM PRO- Vespa Wideframe VM1T, VM2T, VN1T (-60000), VU1T, ACMA 125 (1951-1955), Motovespa 125N (1953-1958) - Ø = 128 × 0,5mm interested, looked [...]

Crankshaft dismantling and insertion tool set Vespa Largeframe -BGM PRO- Made in Germany Press the crankshaft out of its bearing seat quickly and easily like a professional and pull it back in again. This is possible with the quality tool from BGM PRO. With this set, the crankshaft can be pushed out of its press fit in the bearing of the engine housing in a professional and material-friendly manner and also [...]

BGM flywheel nuts are made from high quality 42CrMo4. This material is extremely tensile and clearly surpasses the quality of the original nut. A tight fit of the pole wheel is ensured at all times by the high possible tightening torque. Tightening torque pole wheel nuts M10 / M11 (V50, PV, ET3, PK S, Sprint, VBB ...): 45-50 Nm M12 (PX, Rally, GS160, SS180, T5, Cosa, PK XL): 60-65 [... ]

bgm - Item number: BGM666PXA Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 8,85 kg Category: Engine> Ignition> Ignitions Other customers who are interested in ignition set -BGM PRO 12V Touring - Vespa P80X, P125X, P200E (1977-1983, models with indicator, voltage regulator and battery) - P80X, PX80E (V8X1T), P125X (VNX1T), [...]

bgm - Item number: BGM9977PI Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Engine> Cylinders> Pistons Other customers who are interested in pistons -BGM Original- Piaggio 125ccm AC 2 -Takt - 55,0mm - only interested in BGM9977, also looked for: Pistons | Cylinder piston | Piston | [...]

BGM Pro gear parts are ultra-solid material. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest demands. The very good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. Better than Piaggio Ware. Always consistently high quality. No compromise. BETTER Usable for all [...]

The BGM stainless steel rim is manufactured in Germany with high precision by a renowned and, of course, certified company. The result is a rim that even Enrico Piaggio couldn't have made better. The high-strength rim is characterized by perfect concentricity, absolute freedom from rust and a reinforced rim flange. The rim is screwed into stainless steel with the special nuts provided. Their [...]

Exhaust spring -ANTI RATTLE- stainless steel - 50mm: Stainless steel spring anti-vibration rubber Both heads can be rotated 360 ° Here you will find the luxury version of the exhaust springs, easy to hang in, rust-free and thanks to the rubber coating, completely rattle-free. bgm - Item number: BGM0902 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust [...]