Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]

Consists of the following parts: 8010450 Spacer sleeve, ball bearing, front brake drum -LAMBRETTA- LI, LIS, SX, TV, DL, GP 2x 3710010 Ball bearing -6201 2RS (encapsulated on both sides) - (12x32x10mm) - (used for front wheel Lambretta all) 8010270 Shaft seal 17x32x7mm - (used for front wheel Lambretta LI, LIS, SX, TV, DL, GP, J50, J100, J125, Lui) 9000047 Circlip -BORING DIN472- Ø = 32mm 8010400 Shaft seal [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Remote air filter system based on the bgm PRO suction hose and a Marchald foam air filter. bgm PRO suction hose with increased volume in front of the carburetor compared to the original suction hose. The intake hose is available with four different connection sizes on the carburetor: 40 mm (e.g. Dellorto PHBL 25), 42mm (Dellorto PHBH 28-30), 45 mm (Mikuni TM24 and Jetex SH22) or 50 mm [...]

Brake pads -bgm Pro-. Used among others on: Aprilia Amico 92- (v) Gulliver (v) Rally (v) Rally LC (h) Scarabeo 95- (v) SR Stealth (h & v) Sonic (v) Leonardo 125/150 (h) Benelli 491 (v) 491 Sport (v + h) K2 (v) Honda SFX (v) Italjet Formula 50 94-96 (h) Italjet 125 (h) Malaguti F10 94- (v) [...]

The BGM Pro horn rectifier is a high-quality replacement part for the Piaggio horn rectifier of the Vespa PK, PX, T5 and Cosa models, which is no longer in production. In addition, it has an integrated blink relay for LED blinkers and an output for USB sockets. Regulated direct current output for the horn (12V DC) 12V USB charging output with up to 3A charging power 12V flasher relay [...]

bgm - Item number: BGM7992 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Frames> Wheels> Nuts Other customers who are looking for cap nut set for Vespa rims (type PX ) -BGM ORIGINAL, stainless steel- M8 - SW = 13mm, also looked for: hat nuts | Sentence | Mother | Screw nut [...]

Cylinder head gasket -BGM PRO- 1,5mm Polini 177ccm, DR 177ccm bgm - item number: 3820047 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx who are for Spacer cylinder head -BGM ORIGINAL Polini / DR / Parmakit 0,02 cc- Vespa PX177, PX125, Cosa150, [...]

BGM Pro shims for the clutch are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. WHY The shim is needed to distance the clutch in the engine. It is installed under the coupling pinion and is available in thicknesses of 0,8-1,6 mm (in 0,2 mm increments). [...]

Tapered roller bearings have a larger contact surface and are therefore significantly more resilient than conventional factory solutions with ball bearings. Tapered roller bearings can cope with the high loads of powerful braking systems much better and are also much more wear-resistant. They increase active driving safety by ensuring the ideal state of smooth, non-locking steering for a very long time. A criterion that [...]

BGM gear shoulder rings are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. The quality assurance guarantees a maximum deviation of only four hundredths of a millimeter undersize. This makes the BGM discs much more precise than Piaggio shoulder rings. WHY shoulder rings are used to compensate for the axial play between [...]

Suitable unplanned bgm RD membrane, for all Lambrettas with TS1 cylinders. Perfect combination of excellent durability with high performance! When using a packing plate with the bgm PRO membrane block, no milling of the TS1 inlet is necessary. bgm - Item number: BGM2550A Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 [...]