bgm - Item number: BGM12OR16N Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,12 kg Category: Motor> Gearbox> Seals Other customers who are interested in O-ring 16 × 2,5mm - BGM ORIGINAL- used for kick starter shaft Vespa V50, PV125, ET3, PK, PX, T5 125ccm, Cosa, Rally, Sprint, TS, GT, GTR, Super, GS160 / GS4, [...]

bgm - Item number: BGM0194S Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Gearbox> Primary repair Other customers who are looking for springs for primary repair kit -BGM PRO reinforced- Vespa Wideframe VM, VN, VL, VB, VNA, VNB, VBA, VBB, VGLA, VGLB, VNC1T (-110000) are interested, also searched [...]

bgm - Item number: BGM6010S19 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Gearbox> Shims Other customers who are looking for gear shims -BGM ORIGINAL- Lambretta Series 1-3 - 1,90mm are interested, also looked for: Gear shim | Thrust washer | Washer gear | Gear disc | Spacer [...]

Enables the scooter to be parked quickly and conveniently in the garage, carport, shed, etc. Also ideal for use on a lifting platform, while the two-wheeler is being transported on the loading area of ​​a van or trailer. Reliably fixes the vehicle on the front wheel in a vertical position. To do this, simply drive the front wheel into the seesaw, it folds with [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm gearboxes are always delivered ready-pressed. This allows you to send your old gearbox directly and quickly to the old part - without the hassle of re-pressing the new gearbox. Simply plug & play! Lengthening the gear ratio makes sense if the engine performance has been increased through successful tuning measures. With the extended translation you can [...]

BGM PRO silicone sealing sets consist of a 0,5mm thick, high-quality sealing paper (like Piaggio "green" original). In addition, the seals, which are always in contact with oil, have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the [...]

Mixture adjustment screw BGM PRO for converting Dell'Orto SI carburettors with long hexagon mixture adjustment screw to short slotted screw The BGM PRO conversion mixture adjustment screw is used to use carburettors with long hexagon mixture adjustment screws in older engines (with studs for mounting the carburetor). It replaces the (too) long adjusting screw and enables the carburettor to be dismantled and assembled without any problems. Due to the shorter [...]

bgm CDI with integrated ignition coil for all electronic Vespa and Lambretta ignitions based on the so-called Ducati ignition. suitable for: Vespa PX Vespa PE Vespa T5 Vespa PK Lambretta DL / GP electronic Lambretta with conversion to electronic ignition All Vespas with conversion to electronic ignition * Stable and strong ignition spark up to well over 10.000 rpm. [...]

bgm - Item number: BGM2310M Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Motor> Gearbox> Variomatic slide shoes Other customers who are interested in Vario slide shoe set -BGM PRO- suitable for BGM2311, BGM2312 are also looking for: Vario | Sliding shoe | Set | Sliding shoes | Riser guide | Vario guide | [...]

bgm - Item number: BGM5342 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,18 kg Category: Motor> Brakes> Brake pads Other customers who are interested in brake shoes -BGM PRO Ø = 135x16mm- Piaggio Boss, Piaggio Boxer, Piaggio Bravo, Piaggio CBA, Piaggio Ciao, Piaggio Eco, Piaggio Grillo, Piaggio Si, Piaggio Superbravo, Piaggio [...]