The Kickstarter LIGHT offers an uncompromising racing look. The characteristic thing about holes is mostly the material on the outside of the drum and that is what the LIGHT Kickstarters have to offer. So this light throw can be used excellently to demonstrate what is under the bench. Radical weight reduction has always been one of the means to [...]

Open intake manifold for all Piaggio 50-80 intake manifolds with a small connection, suitable for the carburettors with a small connection width (Areche 17,5 - 21 mm, Dellorto 12 - 19 mm). Decent increase in performance, as the engine can finally breathe freely. The result is better acceleration values ​​and freer turning and thus higher top speed. Very subtle, as the original airbox continues [...]

Disc brake made in Germany with braking torque support (Antidive). This effectively prevents the annoying bottoming out when braking. This means that the large braking force of the disc brake can be used optimally. The Antidive also enables the assembly of softer fork springs, as these no longer have to absorb a bottoming out due to the high braking torque. This improves driving behavior and comfort [...]

bgm - Item number: BGM2220HS05 Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder head -BGM PRO RaceTour Ø = 65,0mm 8-way screw connection - Lambretta LI 125-150, LIS, SX 125-150, TV 175 (series 2-3), DL / GP 125-150 - [...]

BGM PRO Superstrong clutch linings type CR Suitable for the BGM Superstrong type CR clutch for Vespa Largeframe (PX / Cosa / T5, Rally etc.) This CR lining set contains: 3x clutch disks with two sides 1x clutch disc with one side This makes it suitable for all Vespa Largeframe Superstrong clutches of type CR. NOTE: For Lambretta LTH Liedolsheim and Vespa Smallframe MMW Hartz couplings [...]

Good tool = good result This is what the German-made tool for dismantling / assembling the drive-side ball bearing (6305) in the Lambretta motor stands for. This means that replacement is not only done quickly but also precisely. To dismantle, heat the bearing in the motor and then simply pull it out with the tool. For mounting the ideally cold bearing in a [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

Set of engine oil dipstick and gear oil dipstick BGM PRO made of CNC milled, high-strength aluminum. Available in silver or black anodized Suitable for all Piaggio Leader / Quasar 125-300ccm engines 1: 1 replacement for the original plastic dipstick No tools required High-quality manufacture (dipstick with thread + high-strength screw adhesive secured in the head) Incl. O-ring Ready for direct installation ENGINE OIL CHECK Do not run the engine warm, if necessary [...]

Bgm Pro harness, better than original. Every cable harness is professionally manufactured and has solidly pressed (crimped) cable lugs. Where appropriate, they are also provided with protective shrink tubing. Loose wire ends are tinned, with the exception of the cable branch that leads to the light switch with screw clamps. For the greatest possible freedom of assembly, the cables are a little longer than required. Here [...]

Noble CNC milled aluminum sports levers with stainless steel screws from the BGM PRO series. 6-way adjustable lever distance to the handlebar. Vertical folding joint, the lever remains intact in the event of a fall! CNC milled from high-strength 6061 T6 aluminum silver / black hard anodized 6-way adjustable grip width Folds away in the event of a fall or tipping over the motorcycle Safety breaking point for a possible further journey if the folding away [...]

The bgm PRO clutch steel disks are manufactured exactly flat and allow the clutch to be separated precisely. Due to the very good concentricity, the clutch can be perfectly dosed. The steel discs are available in the original thickness of 1,5 millimeters and in a sports version with a height of just 1,0 millimeters. The sport version enables the assembly of a lamellar disc, which [...]

The BGM PRO assembly kit for handlebar end mirrors can be used universally for all motorcycles and scooters. With the adapter, a handlebar end mirror can be mounted quickly and easily. No modifications to the fittings or the handlebars are necessary. (Vehicles whose rubber grips are still closed at the end can be equipped with open grips or, alternatively, the existing grips with [...]