bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]

Mirror from BGM PRO for handlebar mounting on classic Vespa scooters The BGM PRO mirrors have an ideal ratio between arm length and mirror surface. With a mirror surface of just 95mm, the optics harmonize perfectly with classic scooters. The length of the mounting arm was measured so (250mm) that there is always a perfect view to the rear. He protrudes [...]

Special tools - Made in Germany Assemble a bearing quickly and easily like a professional. That is possible with this quality tool. The bearing is neatly guided and cannot tilt. The motor housing is protected. Is used to mount the split roller bearing of the main shaft in the small engine half (Lima side). Material: 42CroMo4 (1100Nmm² tensile strength!) Surface: blue galvanized [...]

BGM ignition base plates and ignition kits are the solid basis for a high-quality engine. The powerful alternator guarantees perfect light output, the HQ ignition components a clean and powerful engine, the BGM pole wheel an extremely quiet engine run. Ideal for upgrading a decrepit, contact-controlled electrical system to a modern, maintenance-free high-performance ignition. ADVANTAGES: High light output thanks to maximum number of windings Proven excitation coil [...]

bgm - Item number: BGM1220MAP Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Seals> Seals Other customers who are interested in sealing crankcase / fan wheel housing -BGM PRO silicone- Lambretta LI. LIS, SX, TV (Series 2-3), DL / GP 125-200 are also interested in: Seal | Crankcase | Fan wheel housing [...]

bgm - Item number: BGM4504 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,30 kg Category: Frames> Brakes> Brake-clutch levers Other customers who wanted brake lever set -BGM PRO CNC Sport, long (165mm) - Vespa GT, GTL, GTS 125-300 - black matt are interested, also looked for: brake lever | Brake handle | [...]

The BGM PRO ignition set made of high-quality components for a double conversion of the Vespa to a maintenance-free, powerful and reliable ignition / generator unit as well as a reinforced crankshaft of the Vespa PK XL models. This set is for the Vespa Smallframe models with a small generator cone. This includes all V50, 50N, SS50, SR50, SS90, V90, 90 Racer, V100, PV, ET3, [...]

Cable branch for connecting the battery / starter relay to the starter motor. This cable branch is not part of the rest of the cable harness and is no longer manufactured by Piaggio. Exactly reproduced in high quality according to the original. Essential part for the perfect restoration. The Elestart works like it did on the first day. bgm - Item number: SC5020 Availability: in stock (Please [...]

Ignition coil -BGM PRO- Peugeot 50-100ccm, Honda 50ccm, Kymco 50ccm. bgm PRO Racing ignition coil with high-end secondary winding. With this coil, the secondary voltage is almost doubled. The standard ignition voltage of the original ignition coil is around 16.000V. With the race high tension coil ignition coil from BGM PRO we achieved an ignition voltage of a full 31.000V !!! The advantage is [...]

Replacement piston for the BGM PRO150ccm cylinder for Vespa Wideframe. Here in the 1st oversize with 57.5mm. The cylinder must be ground / honed to this dimension by an engine reconditioner. The piston has the correct undersize for the grinding dimension 57.5mm in order to obtain the correct piston clearance. Ideal for repairing a defective cylinder. bgm - item number: [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

The BGM clutch linings are manufactured according to special specifications in order to obtain a high-quality, organic lining mixture. This is both pressure and temperature stable and offers the friction disks a good grip. This means that the full torque is always transferred to the gearbox and quick starting processes are also easily handled. A clutch equipped with BGM linings separates due to [...]