The quality of the bgm ORIGINAL CDIs is at the OEM level. In addition, they are open CDIs. This means that no speed limiter is integrated in the CDI. This allows your engine to rev up to the max. The bgm ORIGINAL CDIs are subject to very strict quality controls. This ensures that: a constant and strong ignition spark over the entire engine speed range [...]

BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]

bgm - Item number: BGM2220HS20 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are looking for Spacer cylinder head -BGM PRO RaceTour Ø = 65,0 , 8mm 125-way screw connection - Lambretta LI 150-125, LIS, SX 150-175, TV 2 (series 3-125), DL / GP 150-2,0 - XNUMXmm [...]

Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]

SEALED connectors are sealed and thus offer a very high level of protection against water, dirt and dust (class IP67). They are perfect for use in areas where temperature, water, oil and gasoline resistance are important. Smaller than the commonly used sealed plugs, the types offered here are perfect for the on-board electronics of two-wheelers.

bgm - Item number: BGM2220HS Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are looking for Spacer cylinder head -BGM PRO RaceTour Ø = 65,0 , 8mm 125-way screw connection - Lambretta LI 150-125, LIS, SX 150-175, TV 2 (series 3-125), DL / GP 150-1,5 - XNUMXmm [...]

bgm - Item number: BGM8800Y Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Motor> Clutch> Springs Other customers who are interested in clutch spring set for BGM PRO Superstrong clutch - BGM PRO XL- Vespa V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 [...]

bgm - Item number: 7900055 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Carburetor> Carburetor components Other customers who are interested in mixture adjustment screw -BGM PRO- Mikuni TM 24, TMX 32, TMX 35, TMX 38 were also looking for: mixture adjustment screw | Adjusting screw | Carburetor screw | Propeller [...]

BGM PRO speedometer cables correspond to the factory specification and impress with their high quality and low price. All speedometer cables have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as a high-quality outer shell or a properly pressed square. The installation of the already greased speedometer cable is easy.

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

BGM PRO CDI for IDM retrofit ignitions -original optics in connection with an optimized ignition curve for touring engines- THE PROBLEM OF ORIGINAL IDM CDI ON TOURING ENGINES All IDM-based ignitions (Vespatronic, Malossi VesPower, Polini IDM, Varitronic, Pinasco Flytech, Parmakit etc.) use the same CDI. Their ignition curve is designed for high-performance engines with late performance and high speeds. [...]

The bgm ORIGINAL crankshaft offers you the highest quality at an extremely fair price. The manufacturing accuracy and the materials used are of the highest quality. Both the crank webs and the connecting rod are forged, a complex manufacturing process that makes these shafts extremely reliable and resistant. The storage is also at a very high level, there are [...]