Carburetor revision sets from BGM PRO contain high-quality spare parts to restore an existing carburetor to its factory condition. In addition to the seals, the set also contains the very important float needle. This ensures that the carburetor does not overflow and the engine has a stable idle. TIP: For a perfectly sealing surface, the float needle seat (usually made of brass [...]

The BGM PRO variator dethrottles the drive and enables significantly better acceleration and a higher top speed. The roller tracks have been specifically calculated for each model. The sliding surface of the belt has been optimized for better grip. Thanks to the very good sliding properties of the rollers (including a sliding varnish-coated riser disc), this variator - completely gentle on the engine - already brings up [...]

Fine-knitted glove BGM Protection A breathable back of the hand ensures extra comfort. 100% nylon fine knit for a perfect fit. The PU coating ensures optimal grip and a high sense of touch. At the same time, it protects the palms from dirt and oil. Ideal for work that requires both a high level of protection and a good sense of touch. 100% polyamide black black [...]

Clutch linings are a very important link between the engine and the transmission, and a well-functioning clutch is essential for driving enjoyment, safety and performance. Unfortunately, many manufacturers do not make the appropriate effort with such an important component with the result that the clutches go through or do not separate properly. The lining manufacturers always deliver the decent quality [...]

bgm - Item number: BGM6610BK Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,66 kg Category: Motor> Rubber parts> Hoses Other customers who are interested in radiator hose set -BGM PRO silicone 180 ° C- Vespa GT 125-200, Vespa GTL 125-200, Vespa GTS 125-300, Vespa GTV 125-250 - black are interested, also looked for: [...]

Mirror from BGM PRO for handlebar mounting on classic Vespa scooters The BGM PRO mirrors have an ideal ratio between arm length and mirror surface. With a mirror surface of just 95mm, the optics harmonize perfectly with classic scooters. The length of the mounting arm was measured so (250mm) that there is always a perfect view to the rear. He protrudes [...]

BGM abutments are manufactured in excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old originals from Innocenti. This guarantees a perfect fit. The abutments are required to give the outer cable casing a stop on the frame or in the engine block. They are simply inserted into the corresponding hole. Uses [...]

bgm - Item number: BGM2581 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,19 kg Category: Engine> Carburetor> Intake manifold Other customers who are interested in intake manifold for BGM1550 -BGM PRO Ø24mm for Dellorto PHBL24 / 25, Polini CP23 / 24- Vespa Wideframe 125ccm Vespa V1 to V15, V30 to V33, VN, VM, [...]

BGM hoses are manufactured according to our specifications especially for the needs of Vespa and Lambretta scooters. The butyl content is over 55%, which makes them extremely airtight and absolutely reliable. The high butyl content makes the hose expensive to manufacture, but in our opinion the result justifies the effort. The valves are in model-specific [...]

The EX5 air filters are the inconspicuousness in person. The hard plastic shell ensures a pleasant and discreet suction noise. The foam filter insert offers an enormous air throughput with a great filter performance. To be on the safe side, you should choose a 7-10% larger main jet. The tried and tested EX5 is extremely solid. Another highlight is the infinitely variable adjustability. So you can [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

To be able to mount a different handlebar on your scooter, you need a suitable holder. The brackets are designed to fit our downhill and Fehling handlebars with a 22,2mm diameter. The workmanship and fit are at a very good level and assembly is child's play. This ensures that the handlebars are always securely seated. bgm [...]